Home › Engine / Hybrid System › 1KD-FTV (COOLING) › RADIATOR › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053682 1KD-FTV COOLING _0260664 RADIATOR A

1KD-FTV COOLING  RADIATOR  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Cold Area Specification Vehicles)

NOTICE:
·

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).

·

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).



Hide 53292A 2.REMOVE UPPER RADIATOR SUPPORT SEAL

a.

Remove the 13 clips and upper radiator support seal.


Hide 51405A 4.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 52119A 6.REMOVE FRONT BUMPER COVER

Hide 52521 7.REMOVE FRONT BUMPER UPPER RETAINER

a.
A308006

Remove the 3 bolts and front bumper upper retainer.


Hide 53293C 8.REMOVE RADIATOR SIDE DEFLECTOR RH

a.
A308007

Using a clip remover, detach the 3 claws and remove the clip. Then move the radiator side deflector RH so that the radiator can be removed in the step below.


Hide 53294C 9.REMOVE RADIATOR SIDE DEFLECTOR LH

a.
A308731

Using a clip remover, detach the 3 claws and remove the clip. Then move the radiator side deflector LH so that the radiator can be removed in the step below.


Hide 17342F 11.REMOVE INTERCOOLER AIR HOSE

Hide 82123 13.REMOVE NO. 3 ENGINE WIRE (for Cold Area Specification Vehicles)

Hide 16572D 15.DISCONNECT NO. 2 RADIATOR HOSE

a.
A218378

Slide the clamp and disconnect the No. 2 radiator hose.


Hide 16400 16.REMOVE RADIATOR ASSEMBLY WITH INTERCOOLER ASSEMBLY

a.
A308732

Remove the 4 bolts and radiator assembly with intercooler assembly from the radiator support.


b.
A224941

Remove the 2 No. 1 radiator support seals from the radiator assembly.


Hide 16593 17.REMOVE NO. 1 RADIATOR AIR GUIDE

a.
A218376

Remove the 2 bolts and the No. 1 radiator air guide from the radiator assembly with intercooler assembly.


b.
A224942

Remove the No. 3 radiator support seal from the No. 1 radiator air guide.


Hide 16562 18.REMOVE NO. 2 RADIATOR TO SUPPORT SEAL

Hide 20.REMOVE VACUUM TRANSMITTING PIPE SUB-ASSEMBLY

a.
A218375

Detach the 2 clamps and remove the vacuum transmitting pipe sub-assembly from the radiator assembly.


Hide 16533B 21.REMOVE NO. 1 RADIATOR SUPPORT

a.

Remove the 2 No. 1 radiator supports from the radiator assembly.


Hide 16534 22.REMOVE NO. 2 RADIATOR SUPPORT

a.

Remove the 2 No. 2 radiator supports from the radiator assembly.


Hide 16547 23.REMOVE NO. 1 RADIATOR SUPPORT BUSH

a.

Remove the 4 No. 1 radiator support bushes from the radiator assembly.