Home › Drivetrain › A750F (AUTOMATIC TRANSMISSION / TRANSAXLE) › OIL COOLER › 2015.06–2020.08
RM27T0E _52 Drivetrain _053697 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0260765 OIL COOLER A

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  OIL COOLER  REMOVAL  


PROCEDURE

Hide 51450 1.REMOVE REAR ENGINE UNDER COVER ASSEMBLY

Hide 51405A 2.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 53736B 4.REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL RH

Hide 32941 5.REMOVE NO. 1 OIL COOLER INLET HOSE AND NO. 1 OIL COOLER OUTLET HOSE

a.
C214591

Detach the claw to open the No. 1 flexible hose clamp.


b.

Disconnect the No. 1 oil cooler inlet hose and No. 1 oil cooler outlet hose from the radiator.


c.

Disconnect the 2 hoses from the oil cooler inlet tube and No. 1 oil cooler outlet tube and remove them.

NOTICE:

When disconnecting the hoses from the tube, support the tube by hand and be careful to prevent the tube from being deformed.



Hide 32921 6.REMOVE NO. 1 OIL COOLER INLET TUBE AND NO. 1 OIL COOLER OUTLET TUBE

U170249

a.

Using a union nut wrench, disconnect the No. 1 oil cooler inlet tube and No. 1 oil cooler outlet tube from each oil cooler tube union.


b.

Remove the 3 bolts to open the 3 flexible hose clamps and remove the 2 oil cooler tubes.


c.

Remove the 2 bolts and 2 flexible hose clamps.