Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE HUB BOLT
RM27T0E _52 Drivetrain _053705 AXLE AND DIFFERENTIAL _0260857 REAR AXLE HUB BOLT A

AXLE AND DIFFERENTIAL  REAR AXLE HUB BOLT  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 2.REMOVE PARKING BRAKE ASSEMBLY

a.

Remove the parking brake assembly (See page Brake>PARKING BRAKE>PARKING BRAKE ASSEMBLY>DISASSEMBLY).


Hide 42312E 3.REMOVE REAR AXLE HUB BOLT LH

a.
U116685E06
2.156,0.604 2.417,0.323 false 1.615,1.188 1.177,0.188 false 1.177,0.188 1.042,0.188 false 1.792,1.542 2.167,1.781 false 2.167,1.781 2.365,1.781 false 2.417,0.323 2.573,0.323 false 2.604,0.24 2.948,0.427 0.344,0.188 10 false SST 1.833,1.906 2.083,2.063 0.25,0.156 10 false *b 2.646,1.01 2.875,1.167 0.229,0.156 10 false *a 0.844,0.094 1.073,0.271 0.229,0.177 10 false *1 2.458,1.708 2.688,1.885 0.229,0.177 10 false *1

Using SST and a screwdriver or equivalent to hold the axle hub, remove the hub bolt.

SST
09650-17011  

Text in Illustration
*1 Nut
*a Turn
*b Hold

NOTICE:
·

Do not deform the oil deflector.

·

Make sure to align the notch of SST with the flange of the oil deflector.




Hide 42312E 4.INSTALL REAR AXLE HUB BOLT LH

U116686E05
2.76,0.385 2.906,0.219 false 2.906,0.219 3.021,0.219 false 3.115,1 3.115,1.156 false 1.031,1.313 0.385,1.844 false 0.385,1.844 0.292,1.844 false 1.219,1.677 1.448,1.896 false 1.448,1.896 1.563,1.896 false 3.01,0.125 3.281,0.333 0.271,0.208 10 false *1 3.042,1.167 3.313,1.375 0.271,0.208 10 false *2 1.708,0.281 2.063,0.469 0.354,0.188 10 false *a 0.698,1.896 0.948,2.104 0.25,0.208 10 true *b 0.073,1.781 0.26,2.01 0.188,0.229 10 false *2 1.604,1.792 1.792,2.021 0.188,0.229 10 false *2

a.

Insert a new hub bolt.


b.

Temporarily install a washer and hub nut to the hub bolt as shown in the illustration.

Text in Illustration
*1 Washer
*2 Nut
*a Turn
*b Hold

NOTICE:

Install a hub nut to prevent damage to the hub bolt.



c.

Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.


d.

Remove the hub nut and washer.

NOTICE:

Do not damage the threads of the hub bolt.



Hide 5.INSTALL PARKING BRAKE ASSEMBLY

a.

Install the parking brake assembly (See page Brake>PARKING BRAKE>PARKING BRAKE ASSEMBLY>REASSEMBLY).


Hide 6.INSTALL REAR WHEEL

Torque:
for Aluminum Wheel : 103 N*m (1050 kgf*cm, 76 ft.*lbf)
for Steel Wheel : 112 N*m (1137 kgf*cm, 82 ft.*lbf)