Home › Suspension › SUSPENSION CONTROL › STABILIZER CONTROL ECU › 2015.06–2020.08
RM27T0E _53 Suspension _053706 SUSPENSION CONTROL _0260878 STABILIZER CONTROL ECU A

SUSPENSION CONTROL  STABILIZER CONTROL ECU  INSTALLATION  


PROCEDURE

Hide 1.INSTALL STABILIZER CONTROL ECU

a.

Install the stabilizer control ECU with the bolt.

Torque:
14 N*m (138 kgf*cm, 10 ft.*lbf)

NOTICE:
·

Replace the stabilizer control ECU with a new one if it is dropped.

·

Make sure the bracket rotation stopper touches the installation position.




b.

Connect the connector.

NOTICE:

Securely connect the connector.



Hide 73900 2.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).