Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER
RM27T0E _53 Suspension _053708 FRONT SUSPENSION _0260889 FRONT SHOCK ABSORBER A

FRONT SUSPENSION  FRONT SHOCK ABSORBER  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 4.REMOVE FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY

Hide 5.REMOVE FRONT STABILIZER END BRACKET (w/ KDSS)

Hide 48811 6.REMOVE FRONT STABILIZER BAR (w/ KDSS)

Hide 48810 7.DISCONNECT FRONT STABILIZER LINK ASSEMBLY LH (w/o KDSS)

a.
C099158

Remove the nut and disconnect the stabilizer link from the steering knuckle.

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.



Hide 48820B 8.DISCONNECT FRONT STABILIZER LINK ASSEMBLY RH (w/o KDSS)

HINT:

Use the same procedure described for the LH side.


Hide 48829A 9.REMOVE FRONT NO. 1 STABILIZER BRACKET LH (w/o KDSS)

Hide 48824A 10.REMOVE FRONT NO. 1 STABILIZER BRACKET RH (w/o KDSS)

Hide 48811 11.REMOVE FRONT STABILIZER BAR (w/o KDSS)

Hide 48626 12.DISCONNECT FRONT LOWER BALL JOINT ATTACHMENT LH

a.
F042737

Remove the 2 bolts and disconnect the front lower ball joint attachment from the axle.


Hide 13.REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING (w/ Air Suspension)

a.
C358987

Detach the 3 clamps and disconnect the connector.


b.

Using a 4 mm hexagon wrench, remove the 2 bolts and absorber control actuator.


c.
C115604E01
2.697,1.012 3.131,1.217 0.434,0.205 10 SST 2.697,1.081 2.499,1.081 false 2.499,1.081 2.242,1.778 false

Using SST, remove the nut and bracket.

SST
09961-00950  


d.
C099159

Remove the bolt, nut and washer.


e.
G021670

Remove the 3 nuts on the top of the front shock absorber with coil spring.


f.

Remove the front shock absorber with coil spring.


Hide 14.REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING (w/o Air Suspension)

a.
C099159

Remove the bolt, nut and washer.


b.
C099160

Remove the 3 nuts on the top of the front shock absorber with coil spring.


c.

Remove the front shock absorber with coil spring.