Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ANTI-LOCK BRAKE SYSTEM
RM27T0E _54 Brake _053712 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0260910 ANTI-LOCK BRAKE SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ANTI-LOCK BRAKE SYSTEM  C1203  ECM Communication Circuit Malfunction  


DESCRIPTION

The ABS specification information is determined based on the engine specification information that the brake actuator assembly (skid control ECU) receives from the ECM via CAN communication and the door information (for 3 Door or 5 Door) stored by the brake actuator assembly (skid control ECU).

DTC Code DTC Detection Condition Trouble Area
C1203 The engine, drive source and destination variations that are sent from the ECM do not match the ones of the skid control ECU.
·

ECM

·

Brake actuator assembly



PROCEDURE

1.CHECK PART NUMBER (ECM AND BRAKE ACTUATOR ASSEMBLY)
a.

Check that the proper ECM and brake actuator assembly (skid control ECU) are installed.

Result
Result Proceed to
Proper ECUs are installed A
Proper ECUs are not installed B



A

2.PERFORM CALIBRATION

B

REPLACE ECUS WITH PROPER ONES

2.PERFORM CALIBRATION

NEXT

3.CHECK FOR DTC
3.CHECK FOR DTC
a.

Check for DTC (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ANTI-LOCK BRAKE SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC C1203 is output A
DTC C1203 is not output B



A

B

END