Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type) › 2015.06–2016.08
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260969 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Microphone Circuit between Microphone and Radio Receiver  


DESCRIPTION

Using this circuit, the radio and display receiver assembly sends power to the telephone microphone assembly, and the telephone microphone assembly sends microphone signals to the radio and display receiver assembly.

WIRING DIAGRAM

E286161E01
0.536,2.607 2.352,2.803 1.817,0.197 10 Map Light Assembly 0.781,0.555 1.556,1.237 0.775,0.683 10 Telephone Microphone Assembly 1.802,0.814 2.231,0.973 0.429,0.159 10 MCO+ 1.844,1.204 2.263,1.363 0.419,0.159 10 MCO- 1.787,0.39 2.231,0.549 0.444,0.159 10 MACC 4.454,1.819 5.067,1.978 0.613,0.159 10 Shielded 3.667,1.819 4.280,1.978 0.613,0.159 10 Shielded 2.888,1.819 3.501,1.978 0.613,0.159 10 Shielded 2.311,2.005 2.560,2.165 0.249,0.159 10 14 2.311,0.822 2.523,0.981 0.211,0.159 10 12 2.311,1.211 2.523,1.370 0.211,0.159 10 13 2.311,0.405 2.560,0.564 0.249,0.159 10 11 5.469,2.005 5.597,2.165 0.128,0.159 10 6 5.396,1.604 5.584,1.764 0.188,0.159 10 18 5.469,0.822 5.579,0.981 0.110,0.159 10 5 5.401,1.211 5.584,1.370 0.183,0.159 10 19 5.469,0.405 5.597,0.564 0.128,0.159 10 4 5.417,2.604 6.857,2.962 1.440,0.358 10 Radio and Display Receiver Assembly 0.536,2.44 1.020,2.651 0.484,0.211 10 W7 5.417,2.44 5.840,2.616 0.423,0.175 10 H51 5.711,0.917 6.151,1.076 0.441,0.159 10 MIN+ 5.711,1.295 6.151,1.454 0.441,0.159 10 MIN- 5.711,1.692 6.195,1.851 0.485,0.159 10 SGND 5.711,0.492 6.151,0.652 0.441,0.159 10 MACC 1.83,1.999 2.231,2.158 0.401,0.159 10 SNS2 5.711,2.089 6.151,2.248 0.441,0.159 10 SNS2

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - MAP LIGHT ASSEMBLY)
a.

Disconnect the H51 radio and display receiver assembly connector.


b.

Disconnect the W7 map light assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H51-6 (SNS2) - W7-14 (SNS2) Always Below 1 Ω
H51-4 (MACC) - W7-11 (MACC) Always Below 1 Ω
H51-5 (MIN+) - W7-12 (MCO+) Always Below 1 Ω
H51-19 (MIN-) - W7-13 (MCO-) Always Below 1 Ω
H51-4 (MACC) - Body ground Always 10 kΩ or higher
H51-5 (MIN+) - Body ground Always 10 kΩ or higher
H51-19 (MIN-) - Body ground Always 10 kΩ or higher
H51-18 (SGND) - Body ground Always 10 kΩ or higher




OK

2.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.
U149451E01
2.415,1.802 2.781,1.976 0.365,0.174 10 MIN- 2.053,1.298 2.165,1.896 2.165,1.896 2.391,1.896 false 2.658,1.569 3.101,1.743 0.443,0.174 10 SGND 2.179,1.307 2.408,1.663 2.408,1.663 2.634,1.663 false 2.744,0.273 3.187,0.447 0.443,0.174 10 MACC 0.067,0.04 0.310,0.214 0.242,0.174 10 *a 0.227,0.97 0.566,1.145 0.340,0.174 10 H51 2.168,1.052 2.493,0.367 2.493,0.367 2.72,0.367 false

Remove the radio and display receiver assembly with its connectors still connected (See page Audio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER (for Radio and Display Type)>REMOVAL).


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
H51-4 (MACC) - Body ground Ignition switch ACC 4 to 6 V



c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H51-18 (SGND) - Body ground Always Below 1 Ω
H51-19 (MIN-) - Body ground Always Below 1 Ω



Text in Illustration
*a Component with harness connected
(Radio and Display Receiver Assembly)


OK

3.CHECK TELEPHONE MICROPHONE ASSEMBLY

NG

3.CHECK TELEPHONE MICROPHONE ASSEMBLY
a.

Replace the telephone microphone assembly with a known good one (See page Audio / Visual / Telematics>AUDIO / VIDEO>MICROPHONE AMPLIFIER>REMOVAL).


b.

Check that the malfunction disappears.

OK:

Malfunction disappears.




OK

END (TELEPHONE MICROPHONE ASSEMBLY IS DEFECTIVE)

NG