Home › Audio / Visual / Telematics › AUDIO / VIDEO › STEREO COMPONENT AMPLIFIER › 2015.06–2017.08
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260971 STEREO COMPONENT AMPLIFIER A

AUDIO / VIDEO  STEREO COMPONENT AMPLIFIER  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 86287B 4.REMOVE AMPLIFIER COVER

B359358E02
0.063,0 0.406,0.302 0.344,0.302 10 false *A 0.063,2.969 0.406,3.271 0.344,0.302 10 false *B 0.583,3.094 0.927,3.396 0.344,0.302 10 false *C 3.781,3.073 4.125,3.375 0.344,0.302 10 false *D 0.583,0.396 0.927,0.698 0.344,0.302 10 false *C 3.781,0.396 4.125,0.698 0.344,0.302 10 false *D

Text in Illustration
*A for Pioneer Made *B for JBL Made
*C w/ Seat Heater System *D w/o Seat Heater System

a.

Fold back the floor carpet.


b.

w/ Seat Heater System:

i.

Remove the 3 clips and amplifier cover.



c.

w/o Seat Heater System:

i.

Remove the 3 screws and clip.


ii.

Detach the clamp and remove amplifier cover.



Hide 86280 5.REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY

B359359E02
0.052,0.042 0.427,0.281 0.375,0.24 10 false *A 0.052,2.979 0.427,3.219 0.375,0.24 10 false *B 0.583,0.417 0.958,0.656 0.375,0.24 10 false *C 3.781,0.396 4.156,0.635 0.375,0.24 10 false *D 0.583,3.125 0.958,3.365 0.375,0.24 10 false *C 3.771,3.104 4.146,3.344 0.375,0.24 10 false *D

Text in Illustration
*A for Pioneer Made *B for JBL Made
*C w/ Seat Heater System *D w/o Seat Heater System

a.

Disconnect each connector.


b.

Remove the bolt and 2 screws.


c.

Detach the guide and remove the stereo component amplifier assembly.


Hide 86287C 6.REMOVE NO. 2 AMPLIFIER COVER

B359362E01
0.111,0 0.767,0.516 0.656,0.516 10 *A 3.753,0 4.409,0.516 0.656,0.516 10 *B

Text in Illustration
*A w/ Seat Heater System *B for JBL Made, w/o Seat Heater System

a.

w/ Seat Heater System:

i.

Detach the clamp.


ii.

Remove the screw, bolt and No. 2 amplifier cover.



b.

for JBL Made, w/o Seat Heater System:

i.

Detach the 3 clips and remove the No. 2 amplifier cover.



Hide 86285 7.REMOVE NO. 1 AMPLIFIER BRACKET

a.

Remove the 2 screws and No. 1 amplifier bracket.

B359360E02
0.063,0.042 0.354,0.271 0.292,0.229 10 false *A 0.594,0.417 0.885,0.646 0.292,0.229 10 false *C 3.76,0.406 4.052,0.635 0.292,0.229 10 false *D 0.063,2.948 0.354,3.177 0.292,0.229 10 false *B 0.594,3.115 0.885,3.344 0.292,0.229 10 false *C 3.771,3.115 4.063,3.344 0.292,0.229 10 false *D

Text in Illustration
*A for Pioneer Made *B for JBL Made
*C w/ Seat Heater System *D w/o Seat Heater System


Hide 86286 8.REMOVE NO. 2 AMPLIFIER BRACKET

a.

Remove the 2 screws and No. 2 amplifier bracket.

B359361E02
0.073,0 0.354,0.281 0.281,0.281 10 false *A 0.594,0.385 0.875,0.667 0.281,0.281 10 false *C 3.781,0.365 4.063,0.646 0.281,0.281 10 false *D 0.073,2.948 0.354,3.229 0.281,0.281 10 false *B 0.594,3.083 0.875,3.365 0.281,0.281 10 false *C 3.781,3.104 4.063,3.385 0.281,0.281 10 false *D

Text in Illustration
*A for Pioneer Made *B for JBL Made
*C w/ Seat Heater System *D w/o Seat Heater System