89348A
1.INSTALL NO. 2 ULTRASONIC SENSOR RETAINER
Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.
Align the keyhole and protrusion as shown in the illustration.
Install the ultrasonic sensor retainer to the front bumper cover.
Do not damage the bumper cover with the protrusion when installing the retainer.
| *1 | Keyhole |
89341A
2.INSTALL NO. 1 ULTRASONIC SENSOR
Use the same procedure to install the No. 1 ultrasonic sensor on the other side.
Attach the 2 claws to install the No. 1 ultrasonic sensor.
Connect the connector.
89348D
3.INSTALL ULTRASONIC SENSOR CLIP
Use the same procedure to install the ultrasonic sensor clip on the other side.
Attach the 4 claws to install the ultrasonic sensor clip.
52159
4.INSTALL REAR BUMPER COVER (for 5 Door)
52159
5.INSTALL REAR BUMPER COVER (for 3 Door)
76626E
6.INSTALL REAR QUARTER PANEL MUDGUARD LH
76625G
7.INSTALL REAR QUARTER PANEL MUDGUARD RH
Use the same procedure described for the LH side.
52162B
8.INSTALL NO. 1 REAR BUMPER PLATE
69411
9.INSTALL BACK DOOR CHECK
52179B
10.INSTALL REAR BUMPER BAR PLATE
58766A
11.INSTALL JACK BOX HOLE COVER
51980
12.INSTALL PINTLE HOOK ASSEMBLY (w/ Pintle Hook)