86790C
1.INSTALL SIDE TELEVISION CAMERA ASSEMBLY
Install the side television camera with the 3 screws.
Connect the connector.
Attach the claw as shown in the illustration to install the part labeled A to the part labeled B.
Be careful not to break the claw.
Attach the part labeled C as shown in the illustration.
Install the 5 screws.
Using a T25 "TORX" socket wrench, install the 3 screws.
Clean the threads of the screw with non-residue solvent.
Apply adhesive to the threads of the screw.
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
Attach the 8 claws to install the lower cover.
Attach the 4 claws to install the rubber base.
Install the screw.
Apply 2 new pieces of tape so that they overlap.
| *1 | Tape |
81740
2.INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY LH
87945C
3.INSTALL OUTER MIRROR COVER
87961
4.INSTALL OUTER REAR VIEW MIRROR GLASS
87940
5.INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH
Install the outer rear view mirror (See page Vehicle Exterior>MIRROR (EXT)>OUTER REAR VIEW MIRROR>INSTALLATION).
86790C
6.ADJUST SIDE TELEVISION CAMERA ASSEMBLY
Adjust the side television camera for the passenger side only.
Adjust the side television camera (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>SIDE MONITOR SYSTEM>CALIBRATION).