Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System) › 2015.06–2017.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0261015 PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System) D

PARK ASSIST / MONITORING  PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System)  DIAGNOSIS SYSTEM  


PARKING ASSIST MONITOR DIAGNOSIS SYSTEM


a.

For parking assist monitor system diagnosis, signals received by the parking assist ECU can be checked and the parking assist monitor system can be calibrated, adjusted and checked using the multi-display assembly.

NOTICE:

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System)>CALIBRATION).


HINT:

The displayed screens and items may differ depending on vehicle specifications.




DIAGNOSIS SCREEN TRANSITION (during parking assist ECU initialization)


E282812E01
2.917,0.74 6.083,1.073 3.167,0.333 10 false Start the diagnostic mode referring to the navigation system or audio and visual system

E248984


DIAGNOSIS SCREEN TRANSITION (after parking assist ECU initialization)


E282813E01
2.875,0.865 6.031,1.208 3.156,0.344 10 false Start the diagnostic mode referring to the navigation system or audio and visual system

E282814



SIGNAL CHECK (parking assist ECU input signal)


a.

Start diagnostic mode.


i.
E271944

Select "Function Check/Setting" on the "Service Menu" screen to display the "Function Check/Setting I" screen.


ii.
E271945

Select "Camera Setting" on the "Function Check/Setting I" screen.

HINT:

After "Camera Setting" is selected, the screen transitions differ depending on whether initialization of the parking assist ECU was performed after parking assist ECU replacement.


Parking Assist ECU Initialization Screen Transition
Not performed "Signal Check" screen
Performed "Mode Setting" screen


iii.
E246954

When the screen changes to the "Mode Setting" screen, select "Back Camera Setting" to display the "Signal Check" screen.

HINT:

To select a grayed out item, select and hold the item for 2 seconds or more.




b.
E285879

Signal Check:

i.

On the "Signal Check" screen, it is possible to inspect the state of signals sent to the parking assist ECU and check the settings.

Item Inspection Detail Note
CAN CAN signal input When "CHK" (red) is displayed, selecting "Next" will not change to the next screen.
SHIFT Shift position signal input
CAMERA SW Front and side monitor main switch signal input
MIRROR SW Outer rear view mirror retract signal input
HANDLE Steering position signal input
DEST Destination code signal input
BODY Vehicle body information input
T/M Transmission signal input
D-CAM SET Driver side camera information signal input

HINT:
·

When "CHK" (red) is displayed, perform inspections based on the result of the following inspections.

·

If performing the adjustment after proceeding to the next screen, confirm that all items display "OK" (blue) before selecting "Next".





c.

CAN inspection:

HINT:

If "CHK" (red) is displayed for "CAN", check for DTCs and perform troubleshooting based on the output DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System)>DTC CHECK / CLEAR).



d.

SHIFT inspection:

HINT:

If "CHK" (red) is displayed for "CAN", check for DTCs and perform troubleshooting based on the output DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System)>DTC CHECK / CLEAR).



e.

CAMERA SW inspection:

i.

Check that "OK" (blue) is displayed for "CAMERA SW" and select "OK".


ii.

Check that "OK" (blue) changes to "CHK" (red). Press the front and side monitor main switch assembly and check that "CHK" (red) returns to "OK" (blue).

HINT:

If "CHK" (red) remains displayed or the "CAMERA SW" inspection result is not normal, perform troubleshooting according to Problem Symptoms Table ("CHK" message(s) are displayed on the [Signal Check] screen) (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System)>PROBLEM SYMPTOMS TABLE).




f.

MIRROR SW inspection:

i.

Check that "OK" (blue) is displayed for "MIRROR SW" and select "OK".


ii.

Check that "OK" (blue) changes to "CHK" (red). Press the outer mirror switch and check that "CHK" (red) returns to "OK" (blue).

HINT:

After operating the outer mirror retract switch, if the outer mirror remains in the retracted state, return the outer mirror to the driving position. If "CHK" (red) remains displayed or the "MIRROR SW" inspection result is not normal, perform troubleshooting according to Problem Symptoms Table ("CHK" message(s) are displayed on the [Signal Check] screen) (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System)>PROBLEM SYMPTOMS TABLE).




g.

HANDLE inspection:

i.

Check that the steering position is displayed correctly for "HANDLE" ("LHD" [blue] or "RHD" [blue]).

HINT:

If the steering position is not displayed correctly or "CHK" (red) is displayed, perform troubleshooting according to Problem Symptom Table ("CHK" message(s) are displayed on the Signal Check screen) (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System)>"CHK" message(s) are displayed on the SIGNAL CHECK screen.).




h.

DEST inspection:

i.

Check that displayed for "DEST" is matched destination code for vehicles.

HINT:

If the destination is not displayed correctly or "CHK" (red) is displayed, perform troubleshooting according to Problem Symptom Table ("CHK" message(s) are displayed on the Signal Check screen) (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System)>DTC CHECK / CLEAR).




i.

BODY inspection:

i.

Check that displayed for "BODY" is matched vehicle body information.



j.

T/M inspection:

i.

Check that displayed for "T/M" is matched transmission for vehicles.



k.

D-CAM SET inspection:

i.

Check that "WITH" (blue) is displayed for "D-CAM SET".





CALIBRATION WHEN SERVICING VEHICLE


NOTICE:

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System)>CALIBRATION).