| Estimated course lines are not displayed
|
Parking assist monitor screen display mode settings (Check that estimated course line display mode is selected)
|
-
|
| Parking assist ECU (for LHD)
|
( )
|
| Parking assist ECU (for RHD)
|
( )
|
| "System initializing" is displayed.
|
Correct the steering angle neutral point (Initialization)
|
( )
|
| "System initializing" is displayed even after correcting the steering angle neutral point.
|
Spiral cable sub-assembly
|
( )
|
| Correct the steering angle neutral point (Initialization)
|
( )
|
| Steering angle setting (Calibration)
|
( )
|
| Parking assist ECU (for LHD)
|
( )
|
| Parking assist ECU (for RHD)
|
( )
|
| "System not ready" is displayed.
|
Parking assist ECU initialization (Calibration)
|
( )
|
| "System not ready" is displayed even after parking assist ECU initialization.
|
Parking assist ECU (for LHD)
|
( )
|
| Parking assist ECU (for RHD)
|
( )
|
| During parallel parking assist mode, the screen does not change even though the vehicle has moved.
|
If vehicle is driven in reverse at very low speed, screen may not change
|
-
|
| During parallel parking assist mode, the screen changes even though the vehicle has not moved.
|
If vehicle is stopped for extended period of time, screen may change
|
-
|
| Guide lines and buttons are not displayed for all parking assist monitor screen display modes
|
Proceed to "Guide Lines and Buttons are not Displayed for All Display Modes"
|
( )
|
| Proceed to ""CHK" message(s) are displayed on the SIGNAL CHECK screen"
|
( )
|
| The guide lines and buttons remain displayed even though the luggage compartment door is open
|
Proceed to "Guide Lines and Buttons are not Displayed for All Display Modes"
|
( )
|
| Proceed to ""CHK" message(s) are displayed on the SIGNAL CHECK screen"
|
( )
|
| When adjusting the camera optical axis, "Back door is open. Do not use the rear view monitor when the back door is not completely closed." is displayed even after the back door has been closed
|
Proceed to "Guide Lines and Buttons are not Displayed for All Display Modes"
|
( )
|
| Proceed to ""CHK" message(s) are displayed on the SIGNAL CHECK screen"
|
( )
|
| "CHK" message(s) are displayed on the "Signal Check" screen.
|
Proceed to ""CHK" message(s) are displayed on the SIGNAL CHECK screen"
|
( )
|
| A back door open warning message is displayed even after back door is closed.
|
Proceed to "Guide Lines and Buttons are not Displayed for All Display Modes"
|
( )
|
| Main body ECU (multiplex network body ECU)
|
( )
|
| Parking assist ECU (for LHD)
|
( )
|
| Parking assist ECU (for RHD)
|
( )
|
| When an image of the area behind the vehicle is displayed, the lines are misaligned (the image from the camera is tilted)
|
Back camera position setting (Calibration)
|
( )
|