Confirm the problem symptom.
| Symptom | Proceed to |
|---|---|
| Noise occurs from fan and generator V belt | A |
| Noise occurs from generator assembly | B |
A
B
Check the fan and generator V belt for wear or damage.
The fan and generator V belt is not worn or damaged.
OK
NG
Check the generator pulley with clutch grooves for wear or damage.
The generator pulley with clutch grooves are not worn or damaged.
| The Result | Proceed to |
|---|---|
| OK | A |
| NG (Generator Assembly (for 100 A Type)) | B |
| NG (Generator Assembly (for 130 A Type)) | C |
A
B
(See pagePower Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 100 A Type)>DISASSEMBLY)
C
(See pagePower Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 130 A Type)>DISASSEMBLY)
Start the engine and check the generator pulley with clutch for looseness.
The generator pulley with clutch is not loose.
OK
NG
Remove the generator assembly.
for 100 A Type: (See page Power Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 100 A Type)>REMOVAL)
for 130 A Type: (See page Power Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 130 A Type)>REMOVAL)
Check the installation condition of the generator pulley cap.
The generator pulley cap is not loose or missing.
Check for forming of particles due to friction (for dry type pulley) or grease leaks (for wet type pulley).
There are no large amount of particles (for dry type pulley) or grease leaks (for wet type pulley).
Check the generator pulley with clutch for misalignment (interference with the generator assembly).
The generator pulley with clutch is not misaligned (no interference with the generator assembly).
Turn the generator pulley with clutch clockwise and counterclockwise by hand and check for noise.
Noise does not occur when turned in both directions.
Turn the generator pulley with clutch clockwise and counterclockwise by hand and visually check for runout.
The generator pulley with clutch does not have runout.
Hold the generator rotor assembly (fan) in the generator assembly with a screwdriver, and check that the generator pulley with clutch locks when turned clockwise and turns freely when turned counterclockwise.
The generator pulley with clutch locks when turned clockwise and turns freely when turned counterclockwise.
| The Result | Proceed to |
|---|---|
| OK | A |
| NG (Generator Assembly (for 100 A Type)) | B |
| NG (Generator Assembly (for 130 A Type)) | C |
A
B
(See pagePower Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 100 A Type)>DISASSEMBLY)
C
(See pagePower Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 130 A Type)>DISASSEMBLY)
Perform a road test and check that noise does not occur when decelerating.
Noise does not occur.
Stop the engine and check that generator pulley with clutch noise does not occur as the engine stops.
Noise does not occur.
| The Result | Proceed to |
|---|---|
| OK | A |
| NG (Generator Assembly (for 100 A Type)) | B |
| NG (Generator Assembly (for 130 A Type)) | C |
A
B
(See pagePower Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 100 A Type)>DISASSEMBLY)
C
(See pagePower Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 130 A Type)>DISASSEMBLY)
Remove the generator assembly.
for 100 A Type: (See page Power Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 100 A Type)>REMOVAL)
for 130 A Type: (See page Power Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 130 A Type)>REMOVAL)
Hold the generator rotor assembly (fan) in the generator assembly with a screwdriver, and check that the generator pulley with clutch locks when turned from counterclockwise (free turning direction) to clockwise (locking direction).
The generator pulley with clutch locks.
| The Result | Proceed to |
|---|---|
| OK (Generator Assembly (for 100 A Type)) | A |
| OK (Generator Assembly (for 130 A Type)) | B |
| NG (Generator Assembly (for 100 A Type)) | C |
| NG (Generator Assembly (for 130 A Type)) | D |
A
(See pagePower Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 100 A Type)>DISASSEMBLY)
B
(See pagePower Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 130 A Type)>DISASSEMBLY)
C
(See pagePower Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 100 A Type)>DISASSEMBLY)
D
(See pagePower Source / Network>1GD-FTV (BATTERY / CHARGING)>GENERATOR (for 130 A Type)>DISASSEMBLY)