Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › CURTAIN SHIELD AIRBAG ASSEMBLY › 2015.06–2020.08
RM27T0E _58 Vehicle Interior _053735 SUPPLEMENTAL RESTRAINT SYSTEMS _0261089 CURTAIN SHIELD AIRBAG ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  CURTAIN SHIELD AIRBAG ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 63310 1.REMOVE ROOF HEADLINING ASSEMBLY

a.

for 5 Door:

i.


b.

for 3 Door:

i.


Hide 87217E 2.REMOVE NO. 2 AIR DUCT REAR SIDE (w/ Rear Cooler)

Hide 87217D 3.REMOVE NO. 1 AIR DUCT REAR SIDE (w/ Rear Cooler)

Hide 66425A 4.REMOVE REAR NO. 2 SIDE RAIL SPACER LH (for 3 Door)

Hide 62180A 5.REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)

a.

Disconnect the connector.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.



b.

Remove the 13 bolts and curtain shield airbag.

B238348


Hide 62180A 6.REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)

a.

Disconnect the connector.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.



b.

Remove the 17 bolts and curtain shield airbag.

B238349


Hide 62180A 7.REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (for 3 Door)

a.
B238347

Disconnect the connector.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.



b.

Remove the 11 bolts and curtain shield airbag.

B238350