The skid control ECU receives steering rotation angle information from the steering angle sensor and sends the information to the driving support ECU through the CAN communication line.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1A47 | While the vehicle speed is 50 km/h (31 mph) or more, a steering angle sensor malfunction signal is received from the skid control ECU for 1 second. | ·
Vehicle stability control system ·
Driving support ECU |
Check for DTCs (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM (for Hydraulic Brake Booster)>DTC CHECK / CLEAR).
Vehicle stability control system DTCs are not output.
OK
NG
Clear the DTCs (See page Vehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Vehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>DTC CHECK / CLEAR).
DTC C1A47 is not output.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG