Home › Vehicle Interior › SEAT › POWER SEAT CONTROL ECU (for Rear No. 2 Seat)
RM27T0E _58 Vehicle Interior _053737 SEAT _0261107 POWER SEAT CONTROL ECU(for Rear No. 2 Seat) A

SEAT  POWER SEAT CONTROL ECU(for Rear No. 2 Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

If the fold seat control ECU is replaced with a new one, perform initialization (initial position memorization) of the fold seat control ECU (See page Vehicle Interior>SEAT>REAR POWER SEAT CONTROL SYSTEM>INITIALIZATION).

·

If the fold seat control ECU is exchanged with one from another vehicle, perform initialization (initial position reset and initial position memorization) of the fold seat control ECU (See page Vehicle Interior>SEAT>REAR POWER SEAT CONTROL SYSTEM>INITIALIZATION).



HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 89715 1.INSTALL FOLD SEAT CONTROL ECU

a.

Install the ECU with the 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


b.

Connect the 2 connectors.


Hide 3.PERFORM INITIALIZATION

NOTICE:
·

If the fold seat control ECU is replaced with a new one, perform initialization (initial position memorization) of the fold seat control ECU (See page Vehicle Interior>SEAT>REAR POWER SEAT CONTROL SYSTEM>INITIALIZATION).

·

If the fold seat control ECU is exchanged with one from another vehicle, perform initialization (initial position reset and initial position memorization) of the fold seat control ECU (See page Vehicle Interior>SEAT>REAR POWER SEAT CONTROL SYSTEM>INITIALIZATION).



Hide 4.CHECK REAR NO. 2 SEAT

a.