Home › Vehicle Interior › SEAT BELT › REAR NO. 2 SEAT OUTER BELT ASSEMBLY
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261151 REAR NO. 2 SEAT OUTER BELT ASSEMBLY A

SEAT BELT  REAR NO. 2 SEAT OUTER BELT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 73090A 1.INSTALL SEAT BELT ANCHOR PLATE ASSEMBLY (for RH Side)

a.

Install the anchor plate with the 2 bolts.


Hide 73608 2.INSTALL REAR SEAT OUTER BELT ANCHOR PLATE SUB-ASSEMBLY LH

a.

Install the anchor plate with the bolt.


Hide 73570 3.INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

U115606E04
1.396,1.281 2.281,1.021 2.281,1.021 1.781,1.333 true 2.344,0.896 2.51,1.083 0.167,0.188 10 false a

NOTICE:

When installing the retractor, make sure the claws of the vehicle (labeled "a" in the illustration) only contact the installation areas of the retractor.


a.

Align the seat belt positioning holes with the claws and install the retractor of the seat belt with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


b.

Install the rear No. 2 seat outer belt shoulder anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 62640P 4.INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH

Hide 64740C 5.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

a.

Attach the 4 clips and 8 claws to install the deck trim side panel.


b.

Install the 2 bolts and 2 screws.


c.

Install the rear No. 2 seat outer belt floor anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


d.

Install the rear No. 1 seat outer belt floor anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 64712F 8.INSTALL FRONT DECK SIDE TRIM COVER LH (w/ Tonneau Cover)

Hide 64937A 9.INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

Hide 64725D 10.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

Hide 73233A 11.INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

Hide 57412C 12.INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail)

Hide 57411D 13.INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail)

Hide 62332C 14.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 18.INSTALL REAR NO. 2 SEAT ASSEMBLY LH

a.

for Manual Seat Type:

Install the rear No. 2 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side)>INSTALLATION).


b.

for Power Seat Type:

Install the rear No. 2 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side)>INSTALLATION).