Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261169 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  B1411/11  Room Temperature Sensor Circuit  


DESCRIPTION

The cooler thermistor (room temperature sensor) for the front seat is installed in the instrument panel to detect the room temperature and control the heater and air conditioner auto mode. The resistance of the room temperature sensor changes in accordance with the front room temperature. As the temperature decreases, the resistance increases. As the temperature increases, the resistance decreases.

The air conditioning amplifier assembly applies voltage (5 V) to the room temperature sensor and reads voltage changes as the resistance of the room temperature sensor changes. This sensor also sends the appropriate signals to the air conditioning amplifier assembly.

DTC Code DTC Detection Condition Trouble Area
B1411/11 An open or short in the cooler thermistor (room temperature sensor) circuit.
·

Cooler thermistor (room temperature sensor)

·

Harness or connector

·

Air conditioning amplifier assembly



WIRING DIAGRAM

E156584E69
1.818,0.69 1.944,0.851 0.126,0.161 10 2 1.938,1.165 2.309,1.326 0.370,0.161 10 G27 1.938,1.323 5.014,1.484 3.076,0.161 10 Cooler Thermistor (Room Temperature Sensor) 4.775,2.331 7.053,2.491 2.279,0.161 10 Air Conditioning Amplifier Assembly 3.023,0.69 3.149,0.851 0.126,0.161 10 1 5.122,0.686 5.303,0.847 0.182,0.161 10 29 5.346,0.784 5.651,0.945 0.305,0.161 10 TR 5.342,1.807 5.863,1.968 0.521,0.161 10 SG-1 4.778,2.181 5.083,2.341 0.305,0.161 10 G25 5.083,1.708 5.264,1.869 0.182,0.161 10 34

PROCEDURE

1.READ VALUE USING INTELLIGENT TESTER (ROOM TEMPERATURE SENSOR)
a.

Use the Data List to check if the cooler thermistor (room temperature sensor) is functioning properly (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DATA LIST / ACTIVE TEST).

Air Conditioner
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Room Temperature Sensor Cooler thermistor (room temperature sensor) /
Min.: -6.5°C (20.3°F)
Max.: 57.25°C (135.05°F)
Actual room temperature for front seat displayed Open in the circuit: -6.5°C (20.3°F).
Short in the circuit: 57.25°C (135.05°F).

OK:

The display is as specified in the normal condition column.



Result
Result Proceed to
OK (When troubleshooting according to problem symptoms table) A
OK (When troubleshooting according to the DTC) B
NG C


A

B

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

C

2.INSPECT COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)
2.INSPECT COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)
a.

Remove the cooler thermistor (room temperature sensor) (See page Vehicle Interior>HEATING / AIR CONDITIONING>ROOM TEMPERATURE SENSOR (for Front Side)>REMOVAL).

E346093E01
1.417,1.667 1.885,1.333 1.885,1.333 2.135,1.333 true 4.083,1.354 4.25,1.021 4.25,1.021 4.5,1.021 true 2.208,1.229 2.521,1.427 0.313,0.198 10 false *a 2.917,1 3.229,1.198 0.313,0.198 10 false *b 4.552,0.917 4.865,1.115 0.313,0.198 10 false *c 4.542,2.573 4.854,2.771 0.313,0.198 10 false *d 3.167,0.375 3.479,0.573 0.313,0.198 10 false 4.0 3.167,0.583 3.479,0.781 0.313,0.198 10 false 3.5 3.167,0.792 3.479,0.99 0.313,0.198 10 false 3.0 3.167,1.031 3.479,1.229 0.313,0.198 10 false 2.5 3.167,1.26 3.479,1.458 0.313,0.198 10 false 2.0 3.167,1.49 3.479,1.688 0.313,0.198 10 false 1.5 3.167,1.698 3.479,1.896 0.313,0.198 10 false 1.0 3.167,1.917 3.479,2.115 0.313,0.198 10 false 0.5 3.167,2.156 3.479,2.354 0.313,0.198 10 false 0.0 3.417,2.302 3.729,2.5 0.313,0.198 10 false 10 3.396,2.438 3.708,2.635 0.313,0.198 10 false (50) 3.146,0.198 3.479,0.396 0.333,0.198 10 false (kΩ) 3.854,2.302 4.167,2.5 0.313,0.198 10 false 20 3.823,2.438 4.135,2.635 0.313,0.198 10 false (68) 4.313,2.302 4.625,2.5 0.313,0.198 10 false 30 4.281,2.438 4.698,2.635 0.417,0.198 10 false (86) 4.771,2.302 5.083,2.5 0.313,0.198 10 false 40 4.719,2.438 5.115,2.635 0.396,0.198 10 false (104) 5.208,2.302 5.521,2.5 0.313,0.198 10 false 50 5.156,2.438 5.552,2.635 0.396,0.198 10 false (122) 5.667,2.302 5.979,2.5 0.313,0.198 10 false 60 5.594,2.438 5.99,2.635 0.396,0.198 10 false (140) 6.042,2.385 6.792,2.583 0.75,0.198 10 false °C (°F)


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 10°C (50°F) 3.00 to 3.73 kΩ
15°C (59°F) 2.45 to 2.88 kΩ
20°C (68°F) 1.95 to 2.30 kΩ
25°C (77°F) 1.60 to 1.80 kΩ
30°C (86°F) 1.28 to 1.47 kΩ
35°C (95°F) 1.00 to 1.22 kΩ
40°C (104°F) 0.80 to 1.00 kΩ
45°C (113°F) 0.65 to 0.85 kΩ
50°C (122°F) 0.50 to 0.70 kΩ
55°C (131°F) 0.44 to 0.60 kΩ
60°C (140°F) 0.36 to 0.50 kΩ


Text in Illustration
*a Sensing Portion
*b Resistance
*c Allowable Range
*d Temperature

NOTICE:
·

Even slightly touching the sensor may change the resistance value. Be sure to hold the connector of the sensor.

·

When measuring, the sensor temperature must be the same as the ambient temperature.



HINT:

As the temperature increases, the resistance decreases (refer to the graph).




OK

3.CHECK HARNESS AND CONNECTOR (ROOM TEMPERATURE SENSOR - AIR CONDITIONING AMPLIFIER)

NG

REPLACE COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)

3.CHECK HARNESS AND CONNECTOR (ROOM TEMPERATURE SENSOR - AIR CONDITIONING AMPLIFIER)
a.

Disconnect the G27 sensor connector.


b.

Disconnect the G25 amplifier connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G27-1 - G25-29 (TR) Always Below 1 Ω
G27-2 - G25-34 (SG-1)
G25-29 (TR) - Body ground Always 10 kΩ or higher
G25-34 (SG-1) - Body ground




OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR