Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261170 AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)  B1497  Communication Malfunction (Bus Ic)  


DESCRIPTION

The air conditioning harness assembly connects the air conditioning amplifier assembly and each servo motor. The air conditioning amplifier assembly supplies power and sends operation instructions to each servo motor through the air conditioning harness assembly. Each servo motor sends the damper position information to the air conditioning amplifier assembly.

DTC Code DTC Detection Condition Trouble Area
B1497/97 An open circuit or malfunction in the communication line.
·

Recirculation damper servo sub-assembly

·

Damper servo sub-assembly (air mix damper servo)

·

Damper servo sub-assembly (mode damper servo)

·

Rear air mix damper servo sub-assembly*

·

Rear mode damper servo sub-assembly*

·

Air conditioning harness assembly

·

No. 2 air conditioning harness assembly*

·

Air conditioning amplifier assembly

·

Harness or connector



*: w/ Rear Air Conditioning System


WIRING DIAGRAM

E306701E02
0.104,8.333 2.333,8.542 2.229,0.208 10 false *: w/ Rear Air Conditioning System 2.542,7.156 4.052,7.531 1.51,0.375 10 false Air Conditioning Harness Assembly 0.646,5.365 2.24,5.771 1.594,0.406 10 false Air Conditioning Amplifier Assembly 5.083,0.625 6.021,0.823 0.938,0.198 10 false from Battery 3.719,0.823 4.083,1.073 0.365,0.25 10 false A/C 3.167,0.823 3.396,1.021 0.229,0.198 10 false * 2.448,4.604 2.677,4.802 0.229,0.198 10 false * 2.938,1.688 3.531,1.833 0.594,0.146 10 false B BUS 2.938,2.073 3.417,2.302 0.479,0.229 10 false BUS 2.938,2.458 3.469,2.646 0.531,0.188 10 false BUS G 1.854,0.635 2.042,0.844 0.188,0.208 10 false B 1.729,1.042 2.042,1.208 0.313,0.167 10 false +B2 1.552,1.781 2.01,1.99 0.458,0.208 10 false B BUS 1.677,2.188 2.031,2.354 0.354,0.167 10 false BUS 1.479,2.573 2,2.76 0.521,0.188 10 false BUS G 1.625,4.104 2.063,4.302 0.438,0.198 10 false GND 1.552,4.51 2.031,4.708 0.479,0.198 10 false RGND 2.063,4.104 2.396,4.271 0.333,0.167 10 false G25 2.063,4.5 2.396,4.667 0.333,0.167 10 false G24 2.063,0.688 2.396,0.854 0.333,0.167 10 false G25 2.063,1.083 2.396,1.25 0.333,0.167 10 false G24 2.125,1.771 2.458,1.938 0.333,0.167 10 false z1 2.125,2.167 2.458,2.333 0.333,0.167 10 false z1 2.125,2.573 2.458,2.74 0.333,0.167 10 false z1 2.156,2.375 2.458,2.542 0.302,0.167 10 false 2 2.156,1.979 2.458,2.146 0.302,0.167 10 false 3 2.156,1.583 2.458,1.75 0.302,0.167 10 false 4 2.125,0.896 2.427,1.063 0.302,0.167 10 false 24 2.125,0.49 2.427,0.656 0.302,0.167 10 false 21 2.146,4.313 2.375,4.49 0.229,0.177 10 false 20 2.135,3.906 2.365,4.083 0.229,0.177 10 false 14 4.563,7.167 6.51,7.563 1.948,0.396 10 false Damper Servo Sub-assembly (Mode Damper Servo) 4.521,4.938 6.469,5.365 1.948,0.427 10 false Damper Servo Sub-assembly (Air Mix Damper Servo) 4.594,2.844 6.448,3.229 1.854,0.385 10 false Recirculation Damper Servo Sub-assembly

E302760E05
2.625,0.51 3.146,0.708 0.521,0.198 10 false RBUS 2.625,0.917 3.146,1.115 0.521,0.198 10 false RBBU 2.625,1.313 3.146,1.51 0.521,0.198 10 false RBUG 1.198,0.635 1.719,0.823 0.521,0.188 10 false RBUS* 1.198,1.031 1.719,1.219 0.521,0.188 10 false RBBU* 1.198,1.438 1.719,1.625 0.521,0.188 10 false RBUG* 1.75,0.646 2.104,0.844 0.354,0.198 10 false G24 1.75,1.042 2.104,1.24 0.354,0.198 10 false G24 1.75,1.438 2.104,1.635 0.354,0.198 10 false G24 2.448,0.531 2.677,0.719 0.229,0.188 10 false 3 2.448,0.917 2.677,1.104 0.229,0.188 10 false 4 2.448,1.323 2.677,1.51 0.229,0.188 10 false 2 1.813,0.854 2.042,1.042 0.229,0.188 10 false 23 1.823,1.26 2.052,1.448 0.229,0.188 10 false 21 4.333,1.708 6.01,2.167 1.677,0.458 10 false Rear Air Mix Damper Servo Sub-assembly* 4.531,3.542 6.135,3.969 1.604,0.427 10 false Rear Mode Damper Servo Sub-assembly* 2.198,3.635 2.594,3.854 0.396,0.219 10 false Q13 2.219,3.813 3.656,4.26 1.438,0.448 10 false No. 2 Air Conditioning Harness Assembly* 0.083,4.438 2.469,4.719 2.385,0.281 10 false *: w/ Rear Air Conditioning System 0.323,3.344 1.906,3.75 1.583,0.406 10 false Air Conditioning Amplifier Assembly 1.854,0.479 2.083,0.667 0.229,0.188 10 false 1

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (POWER SOURCE)

*: w/ Rear Air Conditioning System

a.

Disconnect the G24* and G25 air conditioning amplifier assembly connector.


E346098E01
0.906,0.646 1.406,0.896 0.5,0.25 1.49,2.729 1.99,2.979 0.5,0.25 1.083,1.083 1.333,1.083 1.333,1.083 1.583,0.833 true 2.927,0.344 2.677,0.344 2.677,0.344 2.594,0.677 true 1.667,3.25 1.417,3.25 1.417,3.25 1.302,2.927 true 0.708,3.24 0.958,3.24 0.958,3.24 1.031,2.958 true 0.094,0.063 0.406,0.26 0.313,0.198 10 false *a 1.021,0.688 1.333,0.885 0.313,0.198 10 false G25 1.604,2.771 1.917,2.969 0.313,0.198 10 false G24 0.958,1 1.271,1.198 0.313,0.198 10 false B 2.979,0.24 3.344,0.438 0.365,0.198 10 false GND 1.719,3.156 2.031,3.354 0.313,0.198 10 false +B2 0.292,3.167 0.771,3.333 0.479,0.167 10 false RGND

b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
G25-21 (B) - Body ground Always 11 to 14 V
G24-24 (+B2) - Body ground* Always 11 to 14 V



c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G25-14 (GND) - Body ground Always Below 1 Ω
G24-20 (RGND) - Body ground* Always Below 1 Ω


Text in Illustration
*A w/ Rear Air Conditioning System
*a Front view of wire harness connector
(to Air Conditioning Amplifier Assembly)



OK

2.PERFORM ACTIVE TEST USING INTELLIGENT TESTER

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.PERFORM ACTIVE TEST USING INTELLIGENT TESTER
a.

Select the Active Test, use the intelligent tester to generate a control command, and then check that the servo motor operates (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)>DATA LIST / ACTIVE TEST).

Air Conditioner
Tester Display Test Part Control Range Diagnostic Note
Air Mix Servo Targ Pulse (D) Damper servo sub-assembly (air mix damper servo) target pulse Min.: 0, Max.: 255 -
Air Outlet Servo Pulse (D) Damper servo sub-assembly (mode damper servo) pulse Min.: 0, Max.: 255 -
Air Inlet Damper Targ Pulse Recirculation damper servo sub-assembly target pulse Min.: 0, Max.: 255 -
Rear Air Mix Servo Targ Pulse* Rear air mix damper servo sub-assembly target pulse Min.: 0, Max.: 255 w/ Rear Air Conditioning System
A/O Servo Pulse(Rr D)* Rear mode damper servo sub-assembly pulse Min.: 0, Max.: 255 w/ Rear Air Conditioning System

OK:

Arm of the servo motor selected in the Active Test moves smoothly



b.

According to the test, proceed to the next step.


Result
Result Proceed to
One of the front servo motors is malfunctioning A
All of the front servo motors are malfunctioning B
One of the rear servo motors is malfunctioning C
All of the rear servo motors are malfunctioning D


A

3.SYSTEM CHECK

B

7.CHECK AIR CONDITIONING HARNESS ASSEMBLY

C

8.SYSTEM CHECK

D

11.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - NO. 2 AIR CONDITIONING HARNESS ASSEMBLY)
3.SYSTEM CHECK
a.

According to the test, proceed to the next step.


Result
Result Proceed to
Only the damper servo sub-assembly (air mix damper servo) is malfunctioning A
Only the damper servo sub-assembly (mode damper servo) is malfunctioning B
Only the recirculation damper servo sub-assembly is malfunctioning C


A

4.CHECK DAMPER SERVO SUB-ASSEMBLY (AIR MIX DAMPER SERVO)

B

5.CHECK DAMPER SERVO SUB-ASSEMBLY (MODE DAMPER SERVO)

C

6.CHECK RECIRCULATION DAMPER SERVO SUB-ASSEMBLY
4.CHECK DAMPER SERVO SUB-ASSEMBLY (AIR MIX DAMPER SERVO)
a.

Replace the damper servo sub-assembly (air mix damper servo) (See page Vehicle Interior>HEATING / AIR CONDITIONING>FRONT AIR CONDITIONING UNIT>DISASSEMBLY).

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.



b.

Check for DTCs.


Result
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B


A

END (DAMPER SERVO SUB-ASSEMBLY [AIR MIX DAMPER SERVO] IS FAULTY)

B

7.CHECK AIR CONDITIONING HARNESS ASSEMBLY
5.CHECK DAMPER SERVO SUB-ASSEMBLY (MODE DAMPER SERVO)
a.

Replace the damper servo sub-assembly (mode damper servo) (See page Vehicle Interior>HEATING / AIR CONDITIONING>FRONT AIR CONDITIONING UNIT>DISASSEMBLY).

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.



b.

Check for DTCs.


Result
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B


A

END (DAMPER SERVO SUB-ASSEMBLY [MODE DAMPER SERVO] IS FAULTY)

B

7.CHECK AIR CONDITIONING HARNESS ASSEMBLY
6.CHECK RECIRCULATION DAMPER SERVO SUB-ASSEMBLY
a.

Replace the recirculation damper servo sub-assembly (See page Vehicle Interior>HEATING / AIR CONDITIONING>BLOWER UNIT>DISASSEMBLY).

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.



b.

Check for DTCs.


Result
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B


A

END (RECIRCULATION DAMPER SERVO SUB-ASSEMBLY IS FAULTY)

B

7.CHECK AIR CONDITIONING HARNESS ASSEMBLY
7.CHECK AIR CONDITIONING HARNESS ASSEMBLY
a.

Replace the air conditioning harness assembly (See page Vehicle Interior>HEATING / AIR CONDITIONING>FRONT AIR CONDITIONING UNIT>DISASSEMBLY).

HINT:

Since the air conditioning harness assembly cannot be inspected while it is removed from the vehicle, replace the air conditioning harness assembly with a new or a known good one and check that the condition returns to normal.



b.

Check for DTCs.


Result
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B


A

END (AIR CONDITIONING HARNESS ASSEMBLY IS FAULTY)

B

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

8.SYSTEM CHECK
a.

According to the test, proceed to the next step.


Result
Result Proceed to
Only the rear air mix damper servo sub-assembly is malfunctioning A
Only the rear mode damper servo sub-assembly is malfunctioning B


A

9.CHECK REAR AIR MIX DAMPER SERVO SUB-ASSEMBLY

B

10.CHECK REAR MODE DAMPER SERVO SUB-ASSEMBLY
9.CHECK REAR AIR MIX DAMPER SERVO SUB-ASSEMBLY
a.

Replace the rear air mix damper servo sub-assembly (See page Vehicle Interior>HEATING / AIR CONDITIONING>REAR AIR CONDITIONING UNIT>DISASSEMBLY).

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.



b.

Check for DTCs.


Result
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B


A

END (REAR AIR MIX DAMPER SERVO SUB-ASSEMBLY IS FAULTY)

B

11.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - NO. 2 AIR CONDITIONING HARNESS ASSEMBLY)
10.CHECK REAR MODE DAMPER SERVO SUB-ASSEMBLY
a.

Replace the rear mode damper servo sub-assembly (See page Vehicle Interior>HEATING / AIR CONDITIONING>REAR AIR CONDITIONING UNIT>DISASSEMBLY).

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.



b.

Check for DTCs.


Result
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B


A

END (REAR MODE DAMPER SERVO SUB-ASSEMBLY IS FAULTY)

B

11.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - NO. 2 AIR CONDITIONING HARNESS ASSEMBLY)
11.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - NO. 2 AIR CONDITIONING HARNESS ASSEMBLY)
a.

Disconnect the Q13 No. 2 air conditioning harness assembly connector.


b.

Disconnect the G24 air conditioning amplifier assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G24-23 (RBBU) - Q13-4 (RBBU) Always Below 1 Ω
G24-1 (RBUS) - Q13-3 (RBUS) Always Below 1 Ω
G24-21 (RBUG) - Q13-2 (RBUG) Always Below 1 Ω
G24-23 (RBBU) - Body ground Always 10 kΩ or higher
G24-1 (RBUS) - Body ground Always 10 kΩ or higher
G24-21 (RBUG) - Body ground Always 10 kΩ or higher




OK

12.CHECK NO. 2 AIR CONDITIONING HARNESS ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

12.CHECK NO. 2 AIR CONDITIONING HARNESS ASSEMBLY
a.

Replace the No. 2 air conditioning harness assembly (See page Vehicle Interior>HEATING / AIR CONDITIONING>REAR AIR CONDITIONING UNIT>DISASSEMBLY).

HINT:

Since the No. 2 air conditioning harness assembly cannot be inspected while it is removed from the vehicle, replace the No. 2 air conditioning harness assembly with a new or a known good one and check that the condition returns to normal.



b.

Check for DTCs.


Result
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B


A

END (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY IS FAULTY)

B

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY