Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
67920
1.REMOVE DOOR SCUFF PLATE ASSEMBLY LH
62112
2.REMOVE COWL SIDE TRIM BOARD LH
55606
3.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55318C
4.REMOVE INSTRUMENT SIDE PANEL LH
55471A
5.REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)
55480D
6.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for LHD)
55476C
7.REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)
55045
8.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
87290
9.REMOVE HEATER SWITCH ASSEMBLY (for LHD)
Detach the 2 claws and remove the switch.
87290
10.REMOVE HEATER SWITCH ASSEMBLY (for RHD)
Detach the 2 claws and remove the switch.
84453
11.REMOVE IDLE UP SWITCH (for LHD)
Detach the 2 claws and remove the switch.
84453
12.REMOVE IDLE UP SWITCH (for RHD)
Detach the 2 claws and remove the switch.