| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| 015 | The control overheating sensor detects overheating of the engine coolant, and the power heater ECU stops the operation of the heater assembly. (DTCs 012 and/or 014 are detected 10 times in a row.) | ·
Engine coolant circuit (leaks, engine coolant quality, thermostat, water pump assembly) ·
Heater assembly |
Clear the DTCs by pressing the memory clear buttons on the tester to unlock the ECU.
Check for engine coolant leaks (See page Engine / Hybrid System>1GD-FTV (COOLING)>COOLANT>REPLACEMENT).
OK
NG
Check the engine coolant quality (See page Engine / Hybrid System>1GD-FTV (COOLING)>COOLANT>REPLACEMENT).
OK
NG
Remove the thermostat (See page Engine / Hybrid System>1GD-FTV (COOLING)>THERMOSTAT>REMOVAL).
Inspect the thermostat (See page Engine / Hybrid System>1GD-FTV (COOLING)>THERMOSTAT>INSPECTION).
OK
NG
Remove the water pump assembly (See page Engine / Hybrid System>1GD-FTV (COOLING)>WATER PUMP>REMOVAL).
Inspect the water pump assembly (See page Engine / Hybrid System>1GD-FTV (COOLING)>WATER PUMP>ON-VEHICLE INSPECTION).
OK
NG