Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD › 2015.06–2020.08
RM27T0E _58 Vehicle Interior _053741 INTERIOR PANELS / TRIM _0261213 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 55843A 1.REMOVE NO. 1 HEATER TO REGISTER DUCT

B238230

a.

Remove the 4 screws <A> and No. 1 heater to register duct.


Hide 55844 2.REMOVE NO. 2 HEATER TO REGISTER DUCT

HINT:

Use the same procedure described for the No. 1 heater to register duct.


Hide 55971C 3.REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

B238232

a.

Remove the screw <A>.


b.

Detach the 2 claws and remove the No. 1 side defroster nozzle duct.


Hide 55972C 4.REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

HINT:

Use the same procedure described for the No. 1 side defroster nozzle duct.


Hide 55950G 5.REMOVE DEFROSTER NOZZLE ASSEMBLY

B238226

a.

Remove the 4 screws <A> and defroster nozzle assembly.


Hide 55845A 6.REMOVE NO. 3 HEATER TO REGISTER DUCT

B238228

a.

Remove the 2 screws <A> and No. 3 heater to register duct.


Hide 82142 7.REMOVE NO. 2 INSTRUMENT PANEL WIRE

a.

for LHD:

i.

Disconnect the 2 connectors.


ii.

Detach the 20 clamps and remove the No. 2 instrument panel wire.

B238236



b.

for RHD:

i.

Disconnect the 2 connectors.


ii.

Detach the 20 clamps and remove the No. 2 instrument panel wire.

B238237



Hide 55981 8.REMOVE NO. 1 DEFROSTER NOZZLE GARNISH

a.

Remove the 6 screws <A> and No. 1 defroster nozzle garnish.

B238234


Hide 73960A 10.REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

Hide 89611 11.REMOVE ENGINE SWITCH (w/ Entry and Start System)

Hide 55538D 12.REMOVE SUNSHINE SENSOR HOLE COVER (w/o Automatic Light Control System)

a.
B361397

Detach the 2 claws and remove the sunshine sensor hole cover.


Hide 89120 13.REMOVE AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)