Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING (for 3 Door) › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053741 INTERIOR PANELS / TRIM _0261216 ROOF HEADLINING(for 3 Door) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for 3 Door)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 86101J 1.INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

Hide 82171 2.INSTALL NO. 1 ROOF WIRE

a.

Apply butyl tape to the roof headlining so that the tape is aligned with the wire harness marking as shown in the illustration.

HINT:

Use butyl tape that has a width of 10 mm (0.394 in.).


B240565E02
6.365,0.333 6.333,0.156 6.333,0.156 6.229,0.156 false 6.604,0.448 6.521,0.635 6.521,0.635 6.615,0.635 false 6.51,0.375 6.542,0.219 6.542,0.219 6.635,0.219 true 1.5,0.469 1.833,0.729 0.333,0.26 10 false *A 4.896,0.49 5.229,0.75 0.333,0.26 10 false *B 6.646,0.552 6.906,0.792 0.26,0.24 10 false *1 6.042,0.073 6.302,0.313 0.26,0.24 10 false *1 6.646,0.135 6.906,0.375 0.26,0.24 10 false *2

Text in Illustration
*A w/o Sliding Roof *B w/ Sliding Roof
*1 Wire Harness Marking *2 Butyl Tape


b.

Align the No. 1 roof wire with the wire harness installation points as shown in the illustration and attach it to the roof headlining to install it.

HINT:

Be sure to securely attach the roof wire so that it is not twisted.



c.

Attach each clamp.

HINT:

Make sure the EC mirror wire harness (w/ EC Mirror) and rain sensor wire harness (w/ Rain Sensor) are securely set into the cutouts of the roof headlining.



d.

Turn the visor connectors approximately 90° clockwise to install them to the roof headlining.

B240564E02
4.396,3.927 4.198,3.927 false 4.469,3.677 4.5,3.354 4.5,3.354 4.354,3.354 false 4.323,4.396 4.406,4.396 4.406,4.396 4.438,4.177 false 2.052,4 2.094,4.188 2.094,4.188 2.219,4.188 false 6.094,1.854 6.094,2.323 false 2.635,1.917 2.635,2.375 false 0.333,1.885 0.542,2.073 0.208,0.188 10 false A 3.781,1.813 3.99,2 0.208,0.188 10 false A 4.417,0.26 4.625,0.448 0.208,0.188 10 false A 0.927,0.219 1.135,0.406 0.208,0.188 10 false A 3.625,1.438 3.802,1.656 0.177,0.219 10 false B 0.208,1.448 0.385,1.667 0.177,0.219 10 false B 1.781,0.135 2.052,0.417 0.271,0.281 10 false *A 5.198,0.135 5.469,0.417 0.271,0.281 10 false *B 4.177,3.271 4.448,3.552 0.271,0.281 10 false *C 2.24,4.104 2.521,4.281 0.281,0.177 10 false *1 4.021,3.844 4.292,4.167 0.271,0.323 10 false *D 4.146,4.323 4.458,4.635 0.313,0.313 10 false *E 6.021,2.333 6.302,2.51 0.281,0.177 10 false *2 2.573,2.385 2.854,2.563 0.281,0.177 10 false *2 0.927,2.865 1.135,3.052 0.208,0.188 10 false A 4.042,2.719 4.219,2.938 0.177,0.219 10 false B

Text in Illustration
*A w/o Sliding Roof *B w/ Sliding Roof
*C w/ Rain Sensor, for LHD *D w/ EC Mirror
*E w/ Rain Sensor, for RHD - -
*1 Wire Harness Marking *2 Wire Harness Installation Point


Hide 81340H 4.INSTALL VANITY LIGHT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 63344 5.INSTALL NO. 4 ROOF SILENCER PAD (w/o Sliding Roof)

B240556

a.

Align the No. 4 roof silencer pad with the markings on the roof headlining and install the No. 4 roof silencer pad to the position shown in the illustration using hot-melt glue or double-sided tape.


Hide 63342 6.INSTALL NO. 2 ROOF SILENCER PAD (w/o Sliding Roof)

B240560

a.

Align the No. 2 roof silencer pad with the markings on the roof headlining and install the No. 2 roof silencer pad to the position shown in the illustration using hot-melt glue or double-sided tape.


Hide 63341 7.INSTALL NO. 1 ROOF SILENCER PAD

B240557

a.

w/o Sliding Roof:

i.

Align the 3 No. 1 roof silencer pads with the markings on the roof headlining and install the 3 No. 1 roof silencer pads to the position shown in the illustration using hot-melt glue or double-sided tape.



b.
B240562

w/ Sliding Roof:

i.

Align the No. 1 roof silencer pad with the markings on the roof headlining and install the No. 1 roof silencer pad to the position shown in the illustration using hot-melt glue or double-sided tape.