58910C
1.INSTALL CONSOLE BOX ASSEMBLY
Connect the connector and install the console box assembly.
Sufficiently apply compressor oil to 2 new O-rings.
ND-OIL 8 or equivalent
Install the 2 O-rings to the 2 cooler pipes.
Connect the 2 cooler pipes with the 2 bolts.
Connect the drain cooler hose.
Install the 7 bolts and 2 screws.
Install the clip.
58533A
2.INSTALL CENTER FLOOR CARPET COVER RH
Attach the 3 claws to install the center floor carpet cover RH.
58903A
3.INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY
Connect the connector and install the rear console end panel sub-assembly.
88529
4.INSTALL COOLING BOX TRAY
Install the cooling box tray.
58861B
5.INSTALL NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)
6.INSTALL CONSOLE PANEL SUB-ASSEMBLY
for Automatic Transmission:
Install the console panel sub-assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Automatic Transmission)>INSTALLATION).
for Manual Transmission:
Install the console panel sub-assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Manual Transmission)>INSTALLATION).
33504F
7.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
for Automatic Transmission:
Install the shift lever knob sub-assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Automatic Transmission)>INSTALLATION).
for Manual Transmission:
Install the shift lever knob sub-assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Manual Transmission)>INSTALLATION).
58817A
8.INSTALL FRONT NO. 2 CONSOLE BOX INSERT
55607
9.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
58816B
10.INSTALL FRONT NO. 1 CONSOLE BOX INSERT
55606
11.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
58831A
12.INSTALL FRONT CONSOLE UPPER PANEL GARNISH (for Manual Transmission)
58831A
13.INSTALL FRONT CONSOLE UPPER PANEL GARNISH (for Automatic Transmission)
55449C
14.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
55436A
15.INSTALL INSTRUMENT PANEL FINISH PANEL END LH
55448A
16.INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION
55435A
17.INSTALL INSTRUMENT PANEL FINISH PANEL END RH
84010A
18.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
19.INSTALL FRONT SEAT ASSEMBLY
for Manual Seat:
Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>INSTALLATION).
for Power Seat:
Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Power Seat)>INSTALLATION).
for Walk in Seat Type:
Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Walk in Seat Type)>INSTALLATION).
20. WARM UP ENGINE
21.CHARGE REFRIGERANT
22.CHECK FOR REFRIGERANT GAS LEAK