Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM (for Entry Function) › 2016.08–2017.08
RM27T0E _58 Vehicle Interior _053731 THEFT DETERRENT / KEYLESS ENTRY _0261053 ENTRY AND START SYSTEM(for Entry Function) U

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM(for Entry Function)  TERMINALS OF ECU  


CHECK CERTIFICATION ECU


U169647E03
2.427,0.542 2.833,0.802 0.406,0.26 10 false G38 4.677,0.552 5.063,0.813 0.385,0.26 10 false G39

a.

Disconnect the G38 ECU connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G38-1 (+B) - G38-15 (E) V - W-B +B power supply Always 11 to 14 V
G38-15 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
G38-16 (IG) - G38-15 (E) W - W-B IG power supply Engine switch off → on (IG) Below 1 V →11 to 14 V
G38-17 (CUTB) - G38-15 (E) L - W-B +B power supply Always 11 to 14 V

If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the G38 ECU connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G38-3 (CLG1) - G38-15 (E) R - W-B Electrical key antenna (for driver side) sensor signal Engine switch off, all doors closed, key not in cabin and transmitter lock switch not pressed → pressed No pulse generation → Pulse generation
G38-4 (CG1B) - G38-15 (E) G - W-B Electrical key antenna (for driver side) sensor signal Engine switch off, all doors closed, key not in cabin and transmitter lock switch not pressed → pressed No pulse generation → Pulse generation
G38-5 (CLG2) - G38-15 (E) B - W-B Electrical key antenna (for front passenger side) sensor signal Engine switch off, all doors closed, key not in cabin and transmitter lock switch not pressed → pressed No pulse generation → Pulse generation
G38-6 (CG2B) - G38-15 (E) W - W-B Electrical key antenna (for front passenger side) sensor signal Engine switch off, all doors closed, key not in cabin and transmitter lock switch not pressed → pressed No pulse generation → Pulse generation
G38-7 (CLG5) - G38-15 (E) R - W-B Indoor No. 1 electrical key antenna (front floor) sensor signal Engine switch off, all doors closed, key not in cabin and lock sensor off → on No pulse generation → Pulse generation
G38-8 (CG5B) - G38-15 (E) W - W-B Indoor No. 1 electrical key antenna (front floor) sensor signal Engine switch off, all doors closed, key not in cabin and lock sensor off → on No pulse generation → Pulse generation
G38-18 (TSW1) - G38-15 (E) LG - W-B Entry lock sensor (for driver side) detection signal Engine switch off, all doors closed and lock sensor (for driver side) off → on Pulse generation → Below 2 V
G38-19 (TSW2) - G38-15 (E) V - W-B Entry lock sensor (for front passenger side) detection signal Engine switch off, all doors closed and lock sensor (for front passenger side) off → on Pulse generation → Below 2 V
G38-20 (SEN1) - G38-15 (E) W - W-B Entry unlock sensor (for driver side) detection signal Engine switch off, all doors locked, key not sufficiently close to vehicle and unlock sensor (for driver side) off → on Pulse generation → Below 2 V
G38-21 (SEN2) - G38-15 (E) L - W-B Entry unlock sensor (for front passenger side) detection signal Engine switch off, all doors locked, key not sufficiently close to vehicle and unlock sensor (for front passenger side) off → on Pulse generation → Below 2 V
G38-22 (TSW5) - Body ground G - Body ground Luggage electrical key switch signal Unlock switch off → on Pulse generation → Below 1 V
G38-23 (TSW6) - Body ground L - Body ground Luggage electrical key switch signal Lock switch off → on Pulse generation → Below 1 V
G38-24 (CLG6) - G38-15 (E) Y - W-B Indoor No. 2 electrical key antenna (rear floor) sensor signal Engine switch off, all doors closed, key not in cabin and lock sensor off → on No pulse generation → Pulse generation
G38-25 (CG6B) - G38-15 (E) W - W-B Indoor No. 2 electrical key antenna (rear floor) sensor signal Engine switch off, all doors closed, key not in cabin and lock sensor off → on No pulse generation → Pulse generation
G38-26 (CLG7) - G38-15 (E) LG - W-B Indoor No. 3 electrical key antenna (inside luggage) sensor signal Engine switch off, all doors closed, key not in cabin and lock sensor off → on No pulse generation → Pulse generation
G38-27 (CG7B) - G38-15 (E) L - W-B Indoor No. 3 electrical key antenna (inside luggage) sensor signal Engine switch off, all doors closed, key not in cabin and lock sensor off → on No pulse generation → Pulse generation
G38-32 (POS1) - G38-15 (E) R - W-B Entry unlock sensor (for driver side) output signal Engine switch off → on (IG) 9 to 14 V → Below 2 V
G38-33 (POS2) - G38-15 (E) R - W-B Entry unlock sensor (for front passenger side) output signal Engine switch off → on (IG) 9 to 14 V → Below 2 V
G39-5 (RCO) - G38-15 (E) L - W-B Door control receiver power source Engine switch off and transmitter switch not pressed → pressed Below 1 V → 4.5 to 5.5 V
G39-15 (RDA) - G38-15 (E) G - W-B Door control receiver data input signal Engine switch off 11 to 14 V pulse generation at regular intervals
G39-16 (RSSI) - G38-15 (E) P - W-B Door control receiver electric wave existence signal All doors closed, all doors locked and transmitter switch not pressed → pressed 11 to 14 V → Below 2 V
G39-19 (CLG8) - G38-15 (E) B - W-B Electrical key antenna (outside luggage) sensor signal Engine switch off, all doors closed and unlock switch off → on No pulse generation → Pulse generation
G39-20 (CG8B) - G38-15 (E) W - W-B Electrical key antenna (outside luggage) sensor signal Engine switch off, all doors closed and unlock switch off → on No pulse generation → Pulse generation

If the result is not as specified, the certification ECU may have a malfunction.



CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)


U169674E08
1.625,1.469 1.865,1.219 1.865,1.219 1.948,1.219 false 1.625,1.823 1.865,1.583 1.865,1.583 1.948,1.583 false 1.625,2.135 1.865,1.896 1.865,1.896 1.948,1.896 false 1,1.542 0.656,1.104 0.656,1.104 0.521,1.104 false 0.25,1.031 0.552,1.188 0.302,0.156 10 false 2I*A 0.198,1.188 0.552,1.344 0.354,0.156 10 false 2H*B 1.083,3.875 1.365,4.031 0.281,0.156 10 false G63 0.896,2.167 1.104,2.323 0.208,0.156 10 false 2F 5.865,1.49 6.073,1.646 0.208,0.156 10 false 2D 5.865,2.188 6.073,2.344 0.208,0.156 10 false 2A 1.073,2.75 1.281,2.906 0.208,0.156 10 false 2K 3.75,1.292 3.865,1.438 0.115,0.146 10 false A 1.958,1.156 2.292,1.302 0.333,0.146 10 false G65 1.958,1.51 2.271,1.656 0.313,0.146 10 false G64 1.958,1.833 2.271,1.979 0.313,0.146 10 false G63 3.583,3.875 3.875,4.031 0.292,0.156 10 false G64 0.594,5.188 0.75,5.344 0.156,0.156 10 false 2I 1.5,5.188 1.708,5.344 0.208,0.156 10 false 2H 1.885,6.406 2.104,6.563 0.219,0.156 10 false 2D 4.938,6.417 5.156,6.573 0.219,0.156 10 false 2A 3.51,7.677 3.646,7.833 0.135,0.156 10 false A 3.938,5.177 4.135,5.333 0.198,0.156 10 false 2F 5.885,5.177 6.083,5.333 0.198,0.156 10 false 2K 5.896,3.865 6.198,4.021 0.302,0.156 10 false G65 0.875,5.188 1.104,5.365 0.229,0.177 10 false *A 1.844,5.188 2.073,5.365 0.229,0.177 10 false *B

Text in Illustration
*A for LHD *B for RHD

a.

b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A-30 (BECU) - Body ground - Auxiliary battery power supply Always 11 to 14 V
A-31 (ALTB) - Body ground - Auxiliary battery power supply Always 11 to 14 V
A-32 (IG) - Body ground - Engine switch power supply Engine switch on (IG) 11 to 14 V
A-32 (IG) - Body ground - Engine switch power supply Engine switch off Below 1 V
A-29 (ACC) - Body ground - ACC power supply Engine switch on (ACC) 11 to 14 V
A-29 (ACC) - Body ground - ACC power supply Engine switch off Below 1 V
A-11 (GND1) - Body ground - Ground Always Below 1 Ω
G63-3 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness.



d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
2I-27 (FLCY) - Body ground*1 R - Body ground Front door LH courtesy switch input Front door LH open Below 1 V
2I-27 (FLCY) - Body ground*1 R - Body ground Front door LH courtesy switch input Front door LH closed 11 to 14 V
2D-31 (FLCY) - Body ground*2 R - Body ground Front door LH courtesy switch input Front door LH open Below 1 V
2D-31 (FLCY) - Body ground*2 R - Body ground Front door LH courtesy switch input Front door LH closed 11 to 14 V
2D-15 (FRCY) - Body ground*1 B - Body ground Front door RH courtesy switch input Front door RH open Below 1 V
2D-15 (FRCY) - Body ground*1 B - Body ground Front door RH courtesy switch input Front door RH closed 11 to 14 V
2H-26 (FRCY) - Body ground*2 B - Body ground Front door RH courtesy switch input Front door RH open Below 1 V
2H-26 (FRCY) - Body ground*2 B - Body ground Front door RH courtesy switch input Front door RH closed 11 to 14 V
G65-3 (LCTY) - Body ground*3 V - Body ground Rear door LH courtesy light switch input Rear door LH open Below 1 V
G65-3 (LCTY) - Body ground*3 V - Body ground Rear door LH courtesy light switch input Rear door LH closed 11 to 14 V
G64-6 (RCTY) - Body ground*3 R - Body ground Rear door RH courtesy light switch input Rear door RH open Below 1 V
G64-6 (RCTY) - Body ground*3 R - Body ground Rear door RH courtesy light switch input Rear door RH closed 11 to 14 V
G64-19 (BCTY) - Body ground G - Body ground Back door courtesy light switch input Back door open Below 1 V
G64-19 (BCTY) - Body ground G - Body ground Back door courtesy light switch input Engine switch off, all doors closed and back door closed Pulse generation (see waveform 1 or 2)
G64-1 (GCTY) - Body ground*4 V - Body ground Glass hatch courtesy switch input Glass hatch open Below 1 V
G64-1 (GCTY) - Body ground*4 V - Body ground Glass hatch courtesy switch input Engine switch off, all doors closed and glass hatch closed Pulse generation (see waveform 3 or 4)
G64-7 (LSFL) - Body ground G - Body ground Front door LH lock position switch input Front door LH unlocked Below 1 V
G64-7 (LSFL) - Body ground G - Body ground Front door LH lock position switch input Engine switch off, all doors closed and front door LH locked Pulse generation (see waveform 5 or 6)
G64-18 (LSFR) - Body ground G - Body ground Front door RH lock position switch input Front door RH unlocked Below 1 V
G64-18 (LSFR) - Body ground G - Body ground Front door RH lock position switch input Engine switch off, all doors closed and front door RH locked Pulse generation (see waveform 7 or 8)
2I-25 (LSWL) - Body ground*1, *3 B - Body ground Rear door LH lock position switch input Rear door LH unlocked Below 1 V
2I-25 (LSWL) - Body ground*1, *3 B - Body ground Rear door LH lock position switch input Engine switch off, all doors closed and rear door LH locked Pulse generation (see waveform 9 or 10)
2D-16 (LSWL) - Body ground*2, *3 B - Body ground Rear door LH lock position switch input Rear door LH unlocked Below 1 V
2D-16 (LSWL) - Body ground*2, *3 B - Body ground Rear door LH lock position switch input Engine switch off, all doors closed and rear door LH locked Pulse generation (see waveform 11 or 12)
G63-2 (LSWR) - Body ground*3 V - Body ground Rear door RH lock position switch input Rear door RH unlocked Below 1 V
G63-2 (LSWR) - Body ground*3 V - Body ground Rear door RH lock position switch input Engine switch off, all doors closed and rear door RH locked Pulse generation (see waveform 13 or 14)
G65-13 (LSWB) - Body ground SB - Body ground Back door lock position switch input Back door lock unlocked Below 1 V
G65-13 (LSWB) - Body ground SB - Body ground Back door lock position switch input Engine switch off, all doors closed and back door locked Pulse generation (see waveform 15 or 16)

*1: for LHD

*2: for RHD

*3: for 5 Door

*4: w/ Glass Hatch Opener System


If the result is not as specified, the main body ECU or driver side junction block assembly may have a malfunction.


e.
B199631E01
0.166,0.956 0.503,1.113 0.337,0.156 10 GND

Using an oscilloscope, check waveform 1.

Waveform 1 (Reference)
Item Content
Terminal No. (Symbol) G64-19 (BCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and back door closed


f.
B199632E01
0.16,0.946 0.507,1.110 0.347,0.165 10 GND

Using an oscilloscope, check waveform 2.

Waveform 2 (Reference)
Item Content
Terminal No. (Symbol) G64-19 (BCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and back door closed


g.
B199631E01
0.166,0.956 0.503,1.113 0.337,0.156 10 GND

Using an oscilloscope, check waveform 3.

Waveform 3 (Reference)
Item Content
Terminal No. (Symbol) G64-1 (GCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and glass hatch closed


h.
B199632E01
0.16,0.946 0.507,1.110 0.347,0.165 10 GND

Using an oscilloscope, check waveform 4.

Waveform 4 (Reference)
Item Content
Terminal No. (Symbol) G64-1 (GCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and glass hatch closed


i.
B199631E01
0.166,0.956 0.503,1.113 0.337,0.156 10 GND

Using an oscilloscope, check waveform 5.

Waveform 5 (Reference)
Item Content
Terminal No. (Symbol) G64-7 (LSFL) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and front door LH locked


j.
B199632E01
0.16,0.946 0.507,1.110 0.347,0.165 10 GND

Using an oscilloscope, check waveform 6.

Waveform 6 (Reference)
Item Content
Terminal No. (Symbol) G64-7 (LSFL) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and front door LH locked


k.
B199631E01
0.166,0.956 0.503,1.113 0.337,0.156 10 GND

Using an oscilloscope, check waveform 7.

Waveform 7 (Reference)
Item Content
Terminal No. (Symbol) G64-18 (LSFR) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and front door RH locked


l.
B199632E01
0.16,0.946 0.507,1.110 0.347,0.165 10 GND

Using an oscilloscope, check waveform 8.

Waveform 8 (Reference)
Item Content
Terminal No. (Symbol) G64-18 (LSFR) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and front door RH locked


m.
B199631E01
0.166,0.956 0.503,1.113 0.337,0.156 10 GND

Using an oscilloscope, check waveform 9.

Waveform 9 (Reference)
Item Content
Terminal No. (Symbol) 2I-25 (LSWL) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and rear door LH locked


n.
B199632E01
0.16,0.946 0.507,1.110 0.347,0.165 10 GND

Using an oscilloscope, check waveform 10.

Waveform 10 (Reference)
Item Content
Terminal No. (Symbol) 2I-25 (LSWL) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and rear door LH locked


o.
B199631E01
0.166,0.956 0.503,1.113 0.337,0.156 10 GND

Using an oscilloscope, check waveform 11.

Waveform 11 (Reference)
Item Content
Terminal No. (Symbol) 2D-16 (LSWL) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and rear door LH locked


p.
B199632E01
0.16,0.946 0.507,1.110 0.347,0.165 10 GND

Using an oscilloscope, check waveform 12.

Waveform 12 (Reference)
Item Content
Terminal No. (Symbol) 2D-16 (LSWL) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and rear door LH locked


q.
B201885E01
0.177,0.962 0.516,1.111 0.339,0.149 10 GND

Using an oscilloscope, check waveform 13.

Waveform 13 (Reference)
Item Content
Terminal No. (Symbol) G63-2 (LSWR) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and rear door RH locked


r.
B201886E01
0.152,0.94 0.495,1.108 0.343,0.168 10 GND

Using an oscilloscope, check waveform 14.

Waveform 14 (Reference)
Item Content
Terminal No. (Symbol) G63-2 (LSWR) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and rear door RH locked


s.
B199631E01
0.166,0.956 0.503,1.113 0.337,0.156 10 GND

Using an oscilloscope, check waveform 15.

Waveform 15 (Reference)
Item Content
Terminal No. (Symbol) G65-13 (LSWB) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and back door locked


t.
B199632E01
0.16,0.946 0.507,1.110 0.347,0.165 10 GND

Using an oscilloscope, check waveform 16.

Waveform 16 (Reference)
Item Content
Terminal No. (Symbol) G65-13 (LSWB) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, all doors closed and back door locked