Home › Power Source / Network › POWER DISTRIBUTION › MAIN BODY ECU › 2015.06–2017.08
RM27T0E _57 Power Source / Network _053728 POWER DISTRIBUTION _0261028 MAIN BODY ECU A

POWER DISTRIBUTION  MAIN BODY ECU  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).

·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 89221 1.INSTALL MULTIPLEX NETWORK BODY ECU

NOTICE:
·

Make sure that no foreign objects contact the connecting surfaces.

·

Do not touch the ECU connector.



a.
B195951E01
0.26,1.31 0.637,1.507 0.376,0.197 10 20° 2.866,1.456 2.527,1.889 false 2.368,2 2.892,2.632 false 2.901,1.305 3.113,1.485 0.212,0.180 10 *1 2.953,2.558 3.165,2.738 0.212,0.180 10 *2

Insert the multiplex network body ECU until it contacts the housing sidewall of the guide part as shown in the illustration.

Text in Illustration
*1 Housing Sidewall
*2 Guide Part

HINT:

Be sure to maintain an angle of 20° or more as shown in the illustration.



b.
B197889E01
2.888,1.565 3.136,1.756 0.248,0.190 10 *1 2.725,1.164 2.973,1.355 0.248,0.190 10 *2 2.93,2.613 3.178,2.803 0.248,0.190 10 *3 2.689,2.485 2.9,2.671 false 2.612,1.906 2.856,1.692 false 2.373,1.902 2.712,1.289 false

Slide the guide of the multiplex network body ECU along the housing sidewall toward the junction block fuses as shown in the illustration.

Text in Illustration
*1 Housing Sidewall
*2 Guide Part
*3 Junction Block Fuse


c.
B195952E04
2.883,0.604 3.143,0.777 0.260,0.173 10 *1 2.519,1.096 2.849,0.719 false

Slide the multiplex network body ECU so that it contacts side A as shown in the illustration.

Text in Illustration
*1 Side A

NOTICE:

Do not apply excessive force to the multiplex network body ECU.



d.
B195954E01
3.139,0.853 3.331,1.014 0.192,0.161 10 *1 2.843,1.263 3.12,0.955 false

With the multiplex network body ECU to side A of the junction block (point of rotation), rotate it downward as shown in the illustration.

Text in Illustration
*1 Side A Contact Portion


e.
E183108E01
2.581,2.07 2.781,2.238 0.200,0.169 10 *1 2.039,1.209 2.639,2.041 false

Press the pushing area until the claw attaches to install the multiplex network body ECU.

Text in Illustration
*1 Pushing Area

NOTICE:
·

Make sure to press only the pushing area.

·

Confirm the engagement of the multiplex network body ECU and junction block by listening for a lock sound.

·

Do not apply excessive force to the multiplex network body ECU.



HINT:

If a lock sound cannot be heard, visually check the engagement of the lock part. The engagement can also be confirmed if the multiplex network body ECU and junction block are flush.



Hide 2.INSTALL DRIVER SIDE JUNCTION BLOCK ASSEMBLY

a.
E178382

Attach the claw to install the connector as shown in the illustration.

NOTICE:

Be sure to connect each connector securely.



b.
E178380

Attach the 2 claws to lock the connector lock as shown in the illustration.


c.
E178378

Attach the claw to connect the connector as shown in the illustration.

NOTICE:

Be sure to connect the connector securely.



d.

Install the driver side junction block assembly with the bolt and 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


e.
B395416E01
2.323,0.823 2.594,1.063 0.271,0.24 10 true (1) 2.427,1.458 2.698,1.698 0.271,0.24 10 true (1) 2.792,2.417 3.063,2.656 0.271,0.24 10 true (2)

Connect the connector labeled (1).

NOTICE:

Be sure to connect each connector securely.



f.

Attach the 2 claws to connect the 2 connectors labeled (2) as shown in the illustration.

NOTICE:

Be sure to connect each connector securely.



g.

Connect the 3 connectors.

NOTICE:

Be sure to connect each connector securely.



Hide 73900 3.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

Hide 55045 4.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

Hide 55480D 5.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

Hide 55476C 6.INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)

Hide 55471A 7.INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)

Hide 55606 9.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 62112 10.INSTALL COWL SIDE TRIM BOARD LH

a.

for 5 Door:

Install the cowl side trim board LH (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for 5 Door)>INSTALLATION).


b.

for 3 Door:

Install the cowl side trim board LH (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for 3 Door)>INSTALLATION).


Hide 67920 11.INSTALL DOOR SCUFF PLATE ASSEMBLY LH

a.

for 5 Door:

Install the door scuff plate assembly LH (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for 5 Door)>INSTALLATION).


b.

for 3 Door:

Install the door scuff plate assembly LH (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for 3 Door)>INSTALLATION).


Hide 12.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 13.CHECK SRS WARNING LIGHT