Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE REAR NO. 2 SEAT ASSEMBLY LH (w/ Rear No. 2 Seat)
for Manual Seat Type:
Remove the rear No. 2 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side)>REMOVAL).
for Power Seat Type:
Remove the rear No. 2 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side)>REMOVAL).
for Face to Face Seat Type:
Remove the rear No. 2 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY(for Face to Face Seat Type)>REMOVAL).
2.REMOVE REAR SEAT ASSEMBLY LH (for 60/40 Split Slide Walk-in Seat Type LH Side)
3.REMOVE REAR SEATBACK ASSEMBLY LH (for 60/40 Split Double-folding Seat Type LH Side)
Remove the rear seatback assembly LH (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type LH Side)>REMOVAL).
58371F
4.REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)
67934
5.REMOVE INSIDE QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)
67918D
6.REMOVE REAR DOOR SCUFF PLATE LH
62332C
7.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
Partially remove the rear door opening trim weatherstrip so that the front quarter trim panel assembly LH and deck trim side panel assembly LH can be removed (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for 5 Door)>REMOVAL).
64910M
8.REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
64717A
9.REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)
58401A
10.REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)
58574A
11.REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)
57412C
12.REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)
57411D
13.REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)
58570C
14.REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat)
73233A
15.REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER
64725D
16.REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
64937A
17.REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)
64712F
18.REMOVE FRONT DECK SIDE TRIM COVER LH (w/ Tonneau Cover)
74617A
19.REMOVE ASSIST GRIP PLUG (w/ Rear No. 2 Seat)
74603C
20.REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)
64740C
21.REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
w/o Rear No. 2 Seat, w/o Rear Air Conditioning System:
Remove the bolt and floor anchor of the rear No. 1 seat outer belt assembly LH.
Detach the 6 claws, 2 guides and disconnect the rear seatback lock control lever base.
Remove the 4 bolts and 2 screws.
Detach the 5 clips and 8 claws.
Pass the rear seatback lock control lever base through the deck trim side panel assembly and remove the deck trim side panel assembly LH.
w/o Rear No. 2 Seat, w/ Rear Air Conditioning System:
Remove the bolt and floor anchor of the rear No. 1 seat outer belt assembly LH.
Remove the 2 bolts and 2 screws.
Detach the 5 clips and 8 claws and remove the deck trim side panel assembly LH.
w/ Rear No. 2 Seat:
Remove the bolt and floor anchor of the rear No. 1 seat outer belt assembly LH.
Remove the bolt and floor anchor of the rear No. 2 seat outer belt assembly LH.
for RH Side:
Remove the bolt and floor anchor of the rear No. 2 seat outer belt assembly RH.
Remove the 2 bolts and 2 screws.
Detach the 4 clips and 8 claws and remove the deck trim side panel.
62520P
22.REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH
72602B
23.REMOVE REAR NO. 2 SEATBACK LOCK STRIKER SUB-ASSEMBLY LH (for 60/40 Split Double-folding Seat Type LH Side)
73370C
24.REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
Remove the nut and shoulder anchor of the rear No. 1 seat outer belt assembly LH.
Remove the 2 bolts and rear No. 1 seat outer belt assembly LH.
73200A
25.REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
Remove the 2 bolts and front shoulder belt anchor adjuster assembly.