This DTC is stored when a No. 1 headlight ECU sub-assembly LH which is not compatible with the vehicle has been installed. The No. 1 headlight ECU sub-assembly LH stores DTC B2456.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Note |
|---|---|---|---|---|---|
| B2456 | Left Headlight ECU Variation Error | Incompatible No. 1 headlight ECU sub-assembly LH is installed | ·
ECM ·
Main body ECU (multiplex network body ECU) ·
No. 1 headlight ECU sub-assembly LH |
No. 1 headlight ECU sub-assembly LH | - |
If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the No. 1 headlight ECU sub-assembly LH.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (for LED Headlight)>REGISTRATION
Clear the DTCs.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (for LED Headlight)>DTC CHECK / CLEAR
Turn the ignition switch to ON.
Check for DTCs.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (for LED Headlight)>DTC CHECK / CLEAR
DTC B2456 is not output.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG
Check if the part number of the ECM installed to the vehicle is correct.
Part number is correct.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
for 1GR-FE:
Click hereEngine / Hybrid System>1GR-FE (ENGINE CONTROL)>ECM>REMOVAL
for 2TR-FE:
Click hereEngine / Hybrid System>2TR-FE (ENGINE CONTROL)>ECM>REMOVAL
for 1KD-FTV:
Click hereEngine / Hybrid System>1KD-FTV (ENGINE CONTROL)>ECM>REMOVAL
for 1GD-FTV:
Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECM>REMOVAL
Check if the part number of the main body ECU (multiplex network body ECU) installed to the vehicle is correct.
Part number is correct.
| Proceed to |
|---|
| OK |
| NG |
OK
NG