Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX (w/ Refrigerated Cool Box) › from 2017.08
RM27T0E _58 Vehicle Interior _053741 INTERIOR PANELS / TRIM _0261219 FRONT CONSOLE BOX(w/ Refrigerated Cool Box) A

INTERIOR PANELS / TRIM  FRONT CONSOLE BOX(w/ Refrigerated Cool Box)  INSTALLATION  


PROCEDURE

Hide 88520 1.INSTALL COOLING BOX ASSEMBLY

a.

Connect the connector and install the cooling box assembly.


b.

Sufficiently apply compressor oil to 2 new O-rings.

Refrigerant Compressor Oil
HFC-134a (R134a) ND-OIL 8 or equivalent
HFO-1234yf (R1234yf) ND-OIL 12 or equivalent


c.

Install the 2 O-rings to the 2 cooler pipes.


d.

Connect the 2 cooler pipes with the 2 bolts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


e.

Connect the drain cooler hose.


f.

Install the 7 bolts and 2 screws.


g.

Install the clip.


Hide 58533A 2.INSTALL CENTER FLOOR CARPET COVER RH

a.

Attach the 3 claws to install the center floor carpet cover RH.


Hide 58903A 3.INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY

a.

Connect the connector and install the rear console end panel sub-assembly.


Hide 88529 4.INSTALL COOLING BOX TRAY

a.

Install the cooling box tray.


Hide 58861B 5.INSTALL NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)

Hide 33504F 7.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

Hide 55607 9.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55606 11.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 58805E 12.INSTALL LOWER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)

Hide 58805E 13.INSTALL LOWER CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission, w/o Module Switch)

Hide 55405B 14.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Automatic Transmission, w/ Module Switch)

Hide 55449C 15.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

Hide 55436A 16.INSTALL INSTRUMENT PANEL FINISH PANEL END LH

Hide 55448A 17.INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

Hide 55435A 18.INSTALL INSTRUMENT PANEL FINISH PANEL END RH

Hide 84010A 19.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY