Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84153
1.INSTALL AUTO HIGH BEAM SWITCH
Attach the 2 claws to install the auto high beam switch.
55045
2.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
55480D
3.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
55471A
4.INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT
55318C
5.INSTALL INSTRUMENT SIDE PANEL LH
55606
6.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
62112
7.INSTALL COWL SIDE TRIM BOARD LH
67920
8.INSTALL DOOR SCUFF PLATE ASSEMBLY LH