Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55436A
1.REMOVE INSTRUMENT PANEL FINISH PANEL END LH
55435A
2.REMOVE INSTRUMENT PANEL FINISH PANEL END RH
84010A
3.REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
55405B
4.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
84970
5.REMOVE COMBINATION SWITCH ASSEMBLY (HEIGHT CONTROL OFF SWITCH)
Remove the 2 bolts.
Detach the 3 clips.
Remove the combination switch assembly (height control off switch).
Disconnect the clamp and 4 connectors.