CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (for 5L-E)
| *A | for LHD | *B | for RHD |
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
Remove the main body ECU (multiplex network body ECU) from the driver side junction block assembly.
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A-30 (BECU) - Body ground | - | Battery power supply | Always | 11 to 14 V |
| A-31 (ALTB) - Body ground | - | Battery power supply | Always | 11 to 14 V |
| A-32 (IG) - Body ground | - | Ignition switch power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| A-29 (ACC) - Body ground | - | ACC power supply | Ignition switch ACC | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| A-11 (GND1) - Body ground | - | Ground | Always | Below 1 Ω |
Install the main body ECU (multiplex network body ECU).
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>INSTALLATION
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| 2I-27 (FLCY) - Body ground*1 | R - Body ground | Front door LH courtesy light switch input | Front door LH open | Below 1 V |
| Front door LH closed | 11 to 14 V | |||
| 2D-31 (FLCY) - Body ground*2 | R - Body ground | Front door LH courtesy light switch input | Front door LH open | Below 1 V |
| Front door LH closed | 11 to 14 V | |||
| 2D-15 (FRCY) - Body ground*1 | B - Body ground | Front door RH courtesy light switch input | Front door RH open | Below 1 V |
| Front door RH closed | 11 to 14 V | |||
| 2H-26 (FRCY) - Body ground*2 | B - Body ground | Front door RH courtesy light switch input | Front door RH open | Below 1 V |
| Front door RH closed | 11 to 14 V | |||
| G65-3 (LCTY) - Body ground | V - Body ground | Rear door LH courtesy light switch input | Rear door LH open | Below 1 V |
| Rear door LH closed | 11 to 14 V | |||
| G64-6 (RCTY) - Body ground | R - Body ground | Rear door RH courtesy light switch input | Rear door RH open | Below 1 V |
| Rear door RH closed | 11 to 14 V | |||
| G64-19 (BCTY) - Body ground | G - Body ground | Back door courtesy light switch input | Back door open | Below 1 V |
| Ignition switch off, all doors closed and back door closed | 11 to 14 V | |||
| G64-1 (GCTY) - Body ground*3 | V - Body ground | Glass hatch courtesy switch input | Glass hatch open | Below 1 V |
| Ignition switch off, all doors closed and glass hatch closed | 11 to 14 V | |||
| G64-7 (LSFL) - Body ground | G - Body ground | Front door LH lock position switch input | Front door LH unlocked | Below 1 V |
| Ignition switch off, all doors closed and front door LH locked | 11 to 14 V | |||
| G64-18 (LSFR) - Body ground | G - Body ground | Front door RH lock position switch input | Front door RH unlocked | Below 1 V |
| Ignition switch off, all doors closed and front door RH locked | 11 to 14 V | |||
| 2I-25 (LSWL) - Body ground*1 | B - Body ground | Rear door LH lock position switch input | Rear door LH unlocked | Below 1 V |
| Ignition switch off, all doors closed and rear door LH locked | 11 to 14 V | |||
| 2D-16 (LSWL) - Body ground*2 | B - Body ground | Rear door LH lock position switch input | Rear door LH unlocked | Below 1 V |
| Ignition switch off, all doors closed and rear door LH locked | 11 to 14 V | |||
| G63-2 (LSWR) - Body ground | V - Body ground | Rear door RH lock position switch input | Rear door RH unlocked | Below 1 V |
| Ignition switch off, all doors closed and rear door RH locked | 11 to 14 V | |||
| G65-13 (LSWB) - Body ground | SB - Body ground | Back door lock position switch input | Back door lock unlocked | Below 1 V |
| Ignition switch off, all doors closed and back door locked | 11 to 14 V | |||
| G64-25 (PRG) - Body ground | LG - Body ground | Door control receiver output | Key in ignition key cylinder → No key in ignition key cylinder | 11 to 14 V → Pulse generation → 11 to 14 V |
| G64-26 (RDA) - Body ground | P - Body ground | Door control receiver input | No key in ignition key cylinder, all doors closed and transmitter switch off → on | 11 to 14 V → Pulse generation |
| 2F-13 (BZR) - Body ground | GR - Body ground | Wireless door lock buzzer signal | Wireless door lock buzzer off | Below 1 V |
| Wireless door lock buzzer on | Pulse generation | |||
| G64-17 (KSW) - Body ground | G - Body ground | Unlock warning switch input | No key in ignition key cylinder | Pulse generation |
| Key in ignition key cylinder | Below 1 V |
*1: for LHD
*2: for RHD
*3: w/ Glass Hatch Opener System
CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (except 5L-E)
| *A | Main Body ECU (Multiplex Network Body ECU) with 3 connectors | *B | for LHD |
| *C | for RHD | - | - |
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
| *A | Main Body ECU (Multiplex Network Body ECU) with 2 connectors | *B | for LHD |
| *C | for RHD | - | - |
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
Remove the main body ECU (multiplex network body ECU) from the driver side junction block assembly.
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL
Connect the driver side junction block assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A-32 (IG) - Body ground | None - Body ground | Ignition power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| A-31 (BECU) - Body ground | None - Body ground | Battery power supply | Always | 11 to 14 V |
| A-30 (ACC) - Body ground | None - Body ground | ACC power supply | Ignition switch ACC | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| A-11 (GND1) - Body ground | None - Body ground | Ground | Always | Below 1 Ω |
Install the main body ECU (multiplex network body ECU).
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>INSTALLATION
Measure the voltage and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*1: for LHD *2: for RHD *3: w/ Glass Hatch Opener System *4: for 12 Pin Type *5: except 12 Pin Type |
||||
| G218-6 (FLCY) - Body ground | R - Body ground | Front door courtesy light switch assembly LH signal | Front door LH open | Below 1 V |
| Front door LH closed | 11 to 14 V | |||
| G218-27 (FRCY) - Body ground | B - Body ground | Front door courtesy light switch assembly RH signal | Front door RH open | Below 1 V |
| Front door RH closed | 11 to 14 V | |||
| 2N-30 (RCTY) - Body ground*1 | R - Body ground | Rear door courtesy light switch assembly RH signal | Rear door RH open | Below 1 V |
| Rear door RH closed | 11 to 14 V | |||
| 2P-23 (RCTY) - Body ground*2 | R - Body ground | Rear door courtesy light switch assembly RH signal | Rear door RH open | Below 1 V |
| Rear door RH closed | 11 to 14 V | |||
| 2Q-33 (LCTY) - Body ground*1 | V - Body ground | Rear door courtesy light switch assembly LH signal | Rear door LH open | Below 1 V |
| Rear door LH closed | 11 to 14 V | |||
| 2O-15 (LCTY) - Body ground*2 | V - Body ground | Rear door courtesy light switch assembly LH signal | Rear door LH open | Below 1 V |
| Rear door LH closed | 11 to 14 V | |||
| 2Q-27 (BCTY) - Body ground*1 | G - Body ground | Back door courtesy light switch assembly signal | Back door open | Below 1 V |
| Back door close | 11 to 14 V | |||
| 2N-27 (BCTY) - Body ground*2 | G - Body ground | Back door courtesy light switch assembly signal | Back door open | Below 1 V |
| Back door close | 11 to 14 V | |||
| G216-27 (GCTY) - Body ground*3 | V - Body ground | Glass hatch courtesy switch input | Glass hatch open | Below 1 V |
| Ignition switch off, all doors closed and glass hatch closed | 11 to 14 V | |||
| 2O-41 (LSFR) - Body ground | G - Body ground | Front door unlock detection switch RH signal | Front door RH unlocked | Below 1 V |
| Ignition switch off, all doors closed and front door RH locked | 11 to 14 V | |||
| 2N-12 (LSFL) - Body ground | G - Body ground | Front door unlock detection switch LH signal | Front door LH unlocked | Below 1 V |
| Ignition switch off, all doors closed and front door LH locked | 11 to 14 V | |||
| 2Q-26 (LSWL) - Body ground*1 | B - Body ground | Rear door unlock detection switch LH signal | Rear door LH unlocked | Below 1 V |
| Ignition switch off, all doors closed, rear door LH locked | 11 to 14 V | |||
| 2O-38 (LSWL) - Body ground*2 | B - Body ground | Rear door unlock detection switch LH signal | Rear door LH unlocked | Below 1 V |
| Ignition switch off, all doors closed, rear door LH locked | 11 to 14 V | |||
| G216-2 (LSWR) - Body ground | V - Body ground | Rear door unlock detection switch RH signal | Rear door RH unlocked | Below 1 V |
| Ignition switch off, all doors closed, rear door RH locked | 8 to 12 V | |||
| G218-17 (LSWB) - Body ground | SB - Body ground | Back door unlock detection switch signal | Back door unlocked | Below 1 V |
| Ignition switch off, all doors closed, back door locked | 11 to 14 V | |||
| G218-5 (PRG) - Body ground | W - Body ground*4
LG - Body ground*5 |
Signal output to door control receiver | Key inserted into ignition key cylinder → Key pulled out of ignition key cylinder | 11 to 14 V → Pulse generation → 11 to 14 V |
| G218-4 (RDA) - Body ground | B - Body ground*4
P - Body ground*5 |
Signal input from door control receiver | Ignition switch off, all doors closed and door control transmitter assembly switch not pressed | 11 to 14 V |
| Ignition switch off, all doors closed and door control transmitter assembly switch pressed | Pulse generation | |||
| 2M-30 (BZR) - Body ground | GR - Body ground | Wireless door lock buzzer signal | Wireless door lock buzzer off | Below 1 V |
| Wireless door lock buzzer on | Pulse generation | |||
| 2N-28 (KSW) - Body ground | G - Body ground | Unlock warning switch input | No key in ignition key cylinder | Pulse generation |
| Key in ignition key cylinder | Below 1 V | |||