Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55480D
1.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
87290
2.REMOVE HEATER SWITCH ASSEMBLY
| *A | for LHD |
| *B | for RHD |
Detach the 2 claws and remove the heater switch assembly.
58191
3.REMOVE FRONT FLOOR FOOTREST (for LHD)
67920
4.REMOVE DOOR SCUFF PLATE ASSEMBLY LH
62112
5.REMOVE COWL SIDE TRIM BOARD LH
55606
6.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
62312B
7.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
Remove the front door opening trim weatherstrip LH in the range shown in the illustration.
55318C
8.REMOVE INSTRUMENT SIDE PANEL LH
55045
9.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
84453
10.REMOVE IDLE UP SWITCH
| *A | for LHD |
| *B | for RHD |
Detach the 2 claws and remove the idle up switch.