Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55471A
1.REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)
55476C
2.REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)
55480D
3.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
55404D
4.REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
88625Q
5.REMOVE COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)
Detach the 2 claws.
|
Connector |
|
Cooler air hose |
Disconnect the connector and cooler air hose.