Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Manual Air Conditioning System) › from 2017.08
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261170 AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) J

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)  PTC Heater Circuit  


DESCRIPTION

PTC heater relays are closed in accordance with signals from the air conditioning amplifier assembly and power is supplied to the quick heater assembly installed on the radiator heater unit.

WIRING DIAGRAM

E200726E09
6.104,0.573 6.604,0.938 0.5,0.365 10 false PTC1 6.115,2.375 6.719,2.719 0.604,0.344 10 false PTC2 6.104,4.063 6.698,4.438 0.594,0.375 10 false PTC3 5.823,0.458 6.063,0.74 0.24,0.281 10 false 3 5.781,2.219 6.156,2.542 0.375,0.323 10 false 22 5.833,3.969 6.073,4.156 0.24,0.188 10 false 4 4.594,0.927 4.885,1.24 0.292,0.313 10 false 3 4.573,0.458 4.875,0.708 0.302,0.25 10 false 1 3.646,0.448 3.875,0.667 0.229,0.219 10 false 2 3.646,0.917 3.979,1.198 0.333,0.281 10 false 5 3.823,4.875 4.719,5.188 0.896,0.313 10 false PTC NO.3 3.875,3.177 4.927,3.594 1.052,0.417 10 false PTC NO.2 3.406,1.385 4.938,1.583 1.531,0.198 10 false PTC NO.1 or 400W INV 4.594,2.708 4.813,2.896 0.219,0.188 10 false 3 4.583,2.24 4.823,2.49 0.24,0.25 10 false 1 3.656,2.26 3.906,2.49 0.25,0.229 10 false 2 3.646,2.719 3.896,2.938 0.25,0.219 10 false 5 4.594,4.448 4.771,4.708 0.177,0.26 10 false 3 4.573,3.958 4.792,4.177 0.219,0.219 10 false 1 3.646,3.979 3.917,4.219 0.271,0.24 10 false 2 3.656,4.427 3.896,4.635 0.24,0.208 10 false 5 0.854,1.031 1.792,1.729 0.938,0.698 10 false from PTC HTR NO.1 Fuse 0.823,2.844 1.74,3.542 0.917,0.698 10 false from PTC HTR NO. 2 Fuse 0.781,4.542 1.708,5.167 0.927,0.625 10 false from PTC HTR NO. 3 Fuse 5.552,4.823 6.01,4.979 0.458,0.156 10 false G25 5.552,4.99 7.115,5.427 1.563,0.438 10 false Air Conditioning Amplifier Assembly 4.573,5.76 5.042,6.031 0.469,0.271 10 false G28 4.563,6.208 5.063,6.49 0.5,0.281 10 false G28 4.583,6.615 5,6.854 0.417,0.24 10 false G28 1.677,5.76 2.125,6.052 0.448,0.292 10 false G179 1.677,6.615 2.135,6.917 0.458,0.302 10 false G178 1.802,6.375 2.188,6.677 0.385,0.302 10 false 1 1.802,5.531 1.958,5.708 0.156,0.177 10 false 1 4.646,5.521 4.844,5.719 0.198,0.198 10 false 1 4.677,5.979 4.958,6.177 0.281,0.198 10 false 2 4.667,6.417 4.948,6.604 0.281,0.188 10 false 3 4.344,5.656 4.615,5.865 0.271,0.208 10 false B 4.344,6.104 4.667,6.365 0.323,0.26 10 false B 4.344,6.51 4.625,6.719 0.281,0.208 10 false B 2.115,6.51 2.385,6.698 0.271,0.188 10 false E 2.115,5.656 2.5,5.854 0.385,0.198 10 false E 2.396,7 4.563,7.594 2.167,0.594 10 false Quick Heater Assembly

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.INSPECT PTC HEATER RELAY (PTC NO.1 OR 400W INV, PTC NO.2, PTC NO.3)
a.
E199507

Remove the PTC NO.1 or 400W INV, PTC NO.2 and PTC NO.3 relays from the engine room No. 3 relay block.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage is applied to terminals 1 and 2 Below 1 Ω




OK

2.CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

REPLACE PTC HEATER RELAY (PTC NO.1 OR 400W INV, PTC NO.2, PTC NO.3)

2.CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
a.
U149308E01
1.789,0.414 2.074,0.574 0.286,0.161 10 G25 0.066,0.064 0.338,0.225 0.272,0.161 10 *a 2.259,0.157 2.654,0.317 0.395,0.161 10 PTC3 2.896,0.157 3.274,0.317 0.377,0.161 10 PTC1 3.119,0.334 2.533,1.317 false 2.599,1.426 2.51,1.774 false 2.285,1.78 2.680,1.941 0.395,0.161 10 PTC2 2.444,0.334 2.464,1.302 false

Remove the air conditioning amplifier assembly with its connectors still connected (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING AMPLIFIER>REMOVAL).


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
G25-3 (PTC1) - Body ground
·

Engine running (1250 rpm or more)

·

Temperature setting MAX HOT

·

Outside temperature 10°C (50°F) or less

·

Engine coolant temperature 79°C (174°F) or less

·

Headlight dimmer switch off

·

Blower switch off


11 to 14 V
G25-22 (PTC2) - Body ground
·

Engine running (1250 rpm or more)

·

Temperature setting MAX HOT

·

Outside temperature 10°C (50°F) or less

·

Engine coolant temperature 76°C (169°F) or less

·

Headlight dimmer switch off

·

Blower switch off


G25-4 (PTC3) - Body ground
·

Engine running (1250 rpm or more)

·

Temperature setting MAX HOT

·

Outside temperature 10°C (50°F) or less

·

Engine coolant temperature 73°C (163°F) or less

·

Headlight dimmer switch off

·

Blower switch off


G25-3 (PTC1) - Body ground
·

Engine running (1250 rpm or more)

·

Temperature setting MAX HOT

·

Outside temperature 10°C (50°F) or less

·

Engine coolant temperature 79°C (174°F) or less

·

Headlight dimmer switch off

·

Blower switch on


Below 1 V
G25-22 (PTC2) - Body ground
·

Engine running (1250 rpm or more)

·

Temperature setting MAX HOT

·

Outside temperature 10°C (50°F) or less

·

Engine coolant temperature 76°C (169°F) or less

·

Headlight dimmer switch off

·

Blower switch on


G25-4 (PTC3) - Body ground
·

Engine running (1250 rpm or more)

·

Temperature setting MAX HOT

·

Outside temperature 10°C (50°F) or less

·

Engine coolant temperature 73°C (163°F) or less

·

Headlight dimmer switch off

·

Blower switch on




Text in Illustration
*a Component with harness connected
(Air Conditioning Amplifier Assembly)



OK

3.CHECK HARNESS AND CONNECTOR (ENGINE ROOM NO. 3 RELAY BLOCK - AIR CONDITIONING AMPLIFIER)

NG

3.CHECK HARNESS AND CONNECTOR (ENGINE ROOM NO. 3 RELAY BLOCK - AIR CONDITIONING AMPLIFIER)
a.

Remove the PTC heater relays from the engine room No. 3 relay block.


b.

Disconnect the G25 amplifier connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
PTC NO.1 or 400W INV relay terminal 1 - G25-3 (PTC1) Always Below 1 Ω
PTC NO.2 relay terminal 1 - G25-22 (PTC2)
PTC NO.3 relay terminal 1 - G25-4 (PTC3)
PTC NO.1 or 400W INV relay terminal 1 - Body ground Always 10 kΩ or higher
PTC NO.2 relay terminal 1 - Body ground
PTC NO.3 relay terminal 1 - Body ground




OK

4.CHECK HARNESS AND CONNECTOR (ENGINE ROOM NO. 3 RELAY BLOCK - QUICK HEATER)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.CHECK HARNESS AND CONNECTOR (ENGINE ROOM NO. 3 RELAY BLOCK - QUICK HEATER)
a.

Remove the PTC heater relays from the engine room No. 3 relay block.


b.

Disconnect the G28 quick heater connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
PTC NO.1 or 400W INV relay terminal 3 - G28-2 (B) Always Below 1 Ω
PTC NO.2 relay terminal 3 - G28-3 (B)
PTC NO.3 relay terminal 3 - G28-1 (B)
PTC NO.1 or 400W INV relay terminal 3 - Body ground Always 10 kΩ or higher
PTC NO.2 relay terminal 3 - Body ground
PTC NO.3 relay terminal 3 - Body ground




OK

5.CHECK HARNESS AND CONNECTOR (ENGINE ROOM NO. 3 RELAY BLOCK - BATTERY AND BODY GROUND)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.CHECK HARNESS AND CONNECTOR (ENGINE ROOM NO. 3 RELAY BLOCK - BATTERY AND BODY GROUND)
a.
E200727E02
0.131,0 0.350,0.207 0.220,0.207 10 *a 1.831,0.182 2.051,0.389 0.220,0.207 10 *2 1.707,0.844 1.604,0.251 1.604,0.251 1.81,0.251 false 1.096,0.182 1.315,0.389 0.220,0.207 10 *1 0.971,0.844 0.868,0.251 0.868,0.251 1.074,0.251 false 2.5,1.284 2.244,1.855 2.244,1.855 2.444,1.855 false 2.482,1.775 2.702,1.981 0.220,0.207 10 *3

Remove the PTC heater relays from the engine room No. 3 relay block.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
PTC NO.1 or 400W INV relay terminal 5 - Body ground Always 11 to 14 V
PTC NO.2 relay terminal 5 - Body ground
PTC NO.3 relay terminal 5 - Body ground



c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
PTC NO.1 or 400W INV relay terminal 2 - Body ground Always Below 1 Ω
PTC NO.2 relay terminal 2 - Body ground
PTC NO.3 relay terminal 2 - Body ground



Text in Illustration
*1 PTC NO.1 or 400W INV Relay
*2 PTC NO.2 Relay
*3 PTC NO.3 Relay
*a Component without relay installed
(Engine Room No. 3 Relay Block)


OK

6.INSPECT QUICK HEATER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

6.INSPECT QUICK HEATER ASSEMBLY
a.

b.


OK

7.CHECK HARNESS AND CONNECTOR (QUICK HEATER - BODY GROUND)

NG

7.CHECK HARNESS AND CONNECTOR (QUICK HEATER - BODY GROUND)
a.
U170574E01
2.322,1.698 2.551,1.881 0.229,0.184 10 E 1.858,1.612 2.262,1.74 false 0.131,0.056 0.460,0.288 0.330,0.232 10 *a 0.523,1.076 0.912,1.241 0.389,0.165 10 G178 0.523,1.553 0.912,1.718 0.389,0.165 10 G179

Disconnect the G178 and G179 heater connectors.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G178-1 (E) - Body ground Always Below 1 Ω
G179-1 (E) - Body ground


Text in Illustration
*a Front view of wire harness connector
(to Quick Heater Assembly)



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR