*1: for LHD
*2: for RHD
This DTC is stored when items controlled by the front power seat switch LH*1 or RH*2 cannot be customized via the audio and visual system vehicle customization screen.
The front power seat switch LH*1 or RH*2 controls the front power seat control system (w/ Memory) related items that are customizable via the radio and display receiver assembly screen.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15F8 | Front power seat switch LH*1 or RH*2 vehicle setting processing error. | ·
CAN communication system ·
Front power seat control system (w/ Memory) ·
Front power seat switch LH*1 or RH*2 ·
Radio and display receiver assembly |
When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
Use the GTS to check if the CAN communication system is functioning normally.
w/ Central Gateway ECU: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (w/ Central Gateway ECU)>HOW TO PROCEED WITH TROUBLESHOOTING
w/o Central Gateway ECU: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (w/o Central Gateway ECU)>HOW TO PROCEED WITH TROUBLESHOOTING
CAN communication DTCs are not output.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (w/ Central Gateway ECU) | B |
| NG (w/o Central Gateway ECU) | C |
A
B
C
Check if the front power seat control system (w/ Memory) is malfunctioning (See page Vehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM (w/ Memory)>HOW TO PROCEED WITH TROUBLESHOOTING).
Customization may not be possible depending on the malfunction in the front power seat control system (w/ Memory).
No malfunctions are present in the front power seat control system (w/ Memory).
OK
NG
Display the "Vehicle Customization" screen.
Make a note of the customizable items for each front power seat switch LH related system.
These items shown as customizable via the audio and visual system vehicle customization screen can also be changed manually. In a following step, a manual procedure will be used.
Check the customize parameters list for the front power seat control system (w/ Memory) related items that can be customized via the radio and display receiver assembly screen (See page Vehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM (w/ Memory)>CUSTOMIZE PARAMETERS).
Manually change and confirm that it was possible to successfully change the settings of the customize parameters for each system that are available for customization via the radio and display receiver assembly screen.
The items available for customization via the radio and display receiver assembly screen can be customized successfully using the manual procedure.
OK
(See pageAudio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER (for Radio and Display Type)>REMOVAL)
NG