Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Radio and Display Type) › 2017.08–2020.08
RM27T0E _56 Audio / Visual / Telematics _053721 NAVIGATION / MULTI INFO DISPLAY _0260992 NAVIGATION SYSTEM(for Radio and Display Type) C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Radio and Display Type)  B15F5  A/C ECU Vehicle Information Reading/Writing Processor Malfunction  


DESCRIPTION

This DTC is stored when items controlled by the Air conditioning amplifier assembly cannot be customized via the navigation system vehicle customization screen.

HINT:

The Air conditioning amplifier assembly controls the air conditioning system related items that are customizable via the radio and display receiver assembly screen.


DTC Code DTC Detection Condition Trouble Area
B15F5 Air conditioning amplifier assembly vehicle setting processing error.
·

CAN communication system

·

Air conditioning system

·

Air conditioning amplifier assembly

·

Radio and display receiver assembly



PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM
a.

Use the GTS to check if the CAN communication system is functioning normally.


OK:

CAN communication DTCs are not output.


Result
Result Proceed to
OK A
NG (w/ Central Gateway ECU) B
NG (w/o Central Gateway ECU) C



A

2.CHECK AIR CONDITIONING SYSTEM

B

C

2.CHECK AIR CONDITIONING SYSTEM
a.

Check if the air conditioning system is malfunctioning (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>HOW TO PROCEED WITH TROUBLESHOOTING).

HINT:

Customization may not be possible depending on the malfunction in the air conditioning system.


OK:

No malfunctions are present in the air conditioning system.




OK

3.CHECK CUSTOMIZE ITEMS

NG

3.CHECK CUSTOMIZE ITEMS
a.

Display the "Vehicle Customization" screen.


b.

Make a note of the customizable items for the air conditioning system.

HINT:

These air conditioning system items shown as customizable via the radio and display receiver assembly vehicle customization screen can also be changed using the GTS. In the following steps, the GTS will be used.


i.

To match-up the items in the radio and display receiver assembly with the items on the GTS, check the customize parameters list for the air conditioning system related items that can be customized via the radio and display receiver assembly screen (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>CUSTOMIZE PARAMETERS).



c.

Using the GTS, confirm that it is possible to change the settings of the air conditioning system related customize parameters that are shown as customizable via the radio and display receiver assembly screen.

OK:

The items available for customization via the radio and display receiver assembly screen can be customized successfully using the GTS.




OK

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY