| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1428 | With the motor relay off and the motor fail-safe relay on, an open in the motor circuit continues for 2 seconds or more. | Brake actuator assembly (Motor circuit) |
Refer to DTCs C1361, C1461C and C146D (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ANTI-LOCK BRAKE SYSTEM>C1361).
When replacing the skid control ECU (brake actuator assembly), perform zero point calibration (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ANTI-LOCK BRAKE SYSTEM>CALIBRATION).
OK
NG