Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84010A
1.REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
55436A
2.REMOVE INSTRUMENT PANEL FINISH PANEL END LH
55435A
3.REMOVE INSTRUMENT PANEL FINISH PANEL END RH
58805E
4.REMOVE LOWER CONSOLE PANEL SUB-ASSEMBLY
58821C
5.REMOVE UPPER CONSOLE PANEL
85530E
6.REMOVE POWER OUTLET SOCKET ASSEMBLY
Using a screwdriver, depress the claw labeled A from the front of the upper console panel.
Tape the screwdriver tip before use.
While depressing the claw labeled A, detach the claw labeled B from the back of the upper console panel, and then push out the power outlet socket assembly in the direction of the arrow in the illustration to remove it.
| *a | Front of Upper Console Panel | *b | Back of Upper Console Panel |
| *c | Claw A | *d | Claw B |
|
Protective Tape | - | - |
85535E
7.REMOVE NO. 2 POWER OUTLET SOCKET COVER
Detach the 2 claws and remove the No.2 power outlet socket cover.