Home › Vehicle Interior › SEAT › FRONT POWER SEAT CONTROL SYSTEM (w/ Memory) › from 2017.08
RM27T0E _58 Vehicle Interior _053737 SEAT _0261110 FRONT POWER SEAT CONTROL SYSTEM(w/ Memory) U

SEAT  FRONT POWER SEAT CONTROL SYSTEM(w/ Memory)  TERMINALS OF ECU  


CHECK FRONT POWER SEAT SWITCH (for LHD)


U115555E04
4.167,0.333 4.344,0.49 0.177,0.156 10 false b5 3.167,0.333 3.344,0.49 0.177,0.156 10 false b4

a.

Disconnect the b4 and b5 connectors from the front power seat switch LH.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
b4-1 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
b4-2 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
b4-6 (+B2) - b4-1 (GND2) SB - W-B Power source Always 11 to 14 V
b4-7 (+B) - b4-2 (GND) W - W-B Power source Always 11 to 14 V
b5-12 (SYSB) - b4-2 (GND) P - W-B System power source Always 11 to 14 V

If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the b4 and b5 switch connectors.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
b4-3 (SLD+) - b4-2 (GND) L - W-B Sliding motor signal (forward) Slide switch off Below 1 V
Slide switch on (Forward) 11 to 14 V
b4-4 (SLD-) - b4-2 (GND) GR - W-B Sliding motor signal (rearward) Slide switch off Below 1 V
Slide switch on (Rearward) 11 to 14 V
b4-5 (FRV-) - b4-2 (GND) R - W-B Front vertical motor signal (downward) Front vertical switch off Below 1 V
Front vertical switch on (Downward) 11 to 14 V
b4-8 (FRV+) - b4-2 (GND) B - W-B Front vertical motor signal (upward) Front vertical switch off Below 1 V
Front vertical switch on (Upward) 11 to 14 V
b4-9 (RCL+) - b4-2 (GND) P - W-B Reclining motor signal (forward) Reclining switch off Below 1 V
Reclining switch on (Forward) 11 to 14 V
b4-11 (RCL-) - b4-2 (GND) LG - W-B Reclining motor signal (rearward) Reclining switch off Below 1 V
Reclining switch on (Rearward) 11 to 14 V
b4-10 (LFT+) - b4-2 (GND) V - W-B Lifter motor signal (upward) Lifter switch off Below 1 V
Lifter switch on (Upward) 11 to 14 V
b4-12 (LFT-) - b4-2 (GND) G - W-B Lifter motor signal (downward) Lifter switch off Below 1 V
Lifter switch on (Downward) 11 to 14 V
b5-1 (SGND) - b4-2 (GND) BR - W-B Ground Always Below 1 Ω
b5-3 (SSFV) - b5-1 (SGND) R - BR Front vertical position signal Front vertical function operating 4.5 to 4.8 V
b5-4 (SSRL) - b5-1 (SGND) P - BR Lifter position signal Lifter function operating 4.5 to 4.8 V
b5-5 (SSRS) - b5-1 (SGND) G- BR Slide position signal Slide function operating 4.5 to 4.8 V
b5-11 (SSRR) - b5-1 (SGND) V - BR Reclining position signal Reclining function operating 4.5 to 4.8 V

If the result is not as specified, the front power seat switch may have a malfunction.



CHECK FRONT POWER SEAT SWITCH (for RHD)


U169654E02
2.854,0.333 3.031,0.479 0.177,0.146 10 false a5 3.844,0.333 4.021,0.479 0.177,0.146 10 false a4

a.

Disconnect the a4 and a5 connectors from the front power seat switch RH.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
a4-1 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
a4-2 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
a4-6 (+B2) - a4-1 (GND2) SB - W-B Power source Always 11 to 14 V
a4-7 (+B) - a4-2 (GND) W - W-B Power source Always 11 to 14 V
a5-12 (SYSB) - a4-2 (GND) P - W-B System power source Always 11 to 14 V

If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the a4 and a5 switch connectors.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
a4-3 (SLD+) - a4-2 (GND) L - W-B Sliding motor signal (forward) Slide switch off Below 1 V
Slide switch on (Forward) 11 to 14 V
a4-4 (SLD-) - a4-2 (GND) GR - W-B Sliding motor signal (rearward) Slide switch off Below 1 V
Slide switch on (Rearward) 11 to 14 V
a4-5 (FRV-) - a4-2 (GND) R - W-B Front vertical motor signal (downward) Front vertical switch off Below 1 V
Front vertical switch on (Downward) 11 to 14 V
a4-8 (FRV+) - a4-2 (GND) B - W-B Front vertical motor signal (upward) Front vertical switch off Below 1 V
Front vertical switch on (Upward) 11 to 14 V
a4-9 (RCL+) - a4-2 (GND) P - W-B Reclining motor signal (forward) Reclining switch off Below 1 V
Reclining switch on (Forward) 11 to 14 V
a4-11 (RCL-) - a4-2 (GND) LG - W-B Reclining motor signal (rearward) Reclining switch off Below 1 V
Reclining switch on (Rearward) 11 to 14 V
a4-10 (LFT+) - a4-2 (GND) V - W-B Lifter motor signal (upward) Lifter switch off Below 1 V
Lifter switch on (Upward) 11 to 14 V
a4-12 (LFT-) - a4-2 (GND) G - W-B Lifter motor signal (downward) Lifter switch off Below 1 V
Lifter switch on (Downward) 11 to 14 V
a5-1 (SGND) - a4-2 (GND) BR - W-B Ground Always Below 1 Ω
a5-3 (SSFV) - a5-1 (SGND) R - BR Front vertical position signal Front vertical function operating 4.5 to 4.8 V
a5-4 (SSRL) - a5-1 (SGND) P - BR Lifter position signal Lifter function operating 4.5 to 4.8 V
a5-5 (SSRS) - a5-1 (SGND) G - BR Slide position signal Slide function operating 4.5 to 4.8 V
a5-11 (SSRR) - a5-1 (SGND) V - BR Reclining position signal Reclining function operating 4.5 to 4.8 V

If the result is not as specified, the front power seat switch may have a malfunction.



CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)


E373864C01
3.271,7.844 3.781,8.083 0.51,0.24 4.583,6.177 5.094,6.417 0.51,0.24 1.469,6.177 1.979,6.417 0.51,0.24 1.271,4.677 1.781,4.917 0.51,0.24 3.708,4.469 4.219,4.708 0.51,0.24 5.24,4.469 5.75,4.708 0.51,0.24 6.26,4.448 6.771,4.688 0.51,0.24 5.583,3.094 6.094,3.333 0.51,0.24 3.49,3.083 4,3.323 0.51,0.24 1.271,3.135 1.781,3.375 0.51,0.24 1.271,4.354 1.781,4.594 0.51,0.24 1.604,0.646 1.604,0.417 1.604,0.417 1.76,0.417 false 0.615,1.302 0.948,1.302 true 1.625,1.156 1.958,1.156 true 1.635,1.469 1.969,1.469 true 1.646,1.833 1.979,1.833 true 1.823,0.292 2.135,0.49 0.313,0.198 10 false *1 0.125,0.125 0.51,0.385 0.385,0.26 12 false *A 0.229,1.188 0.615,1.563 0.385,0.375 10 false 2Q*B 2P*C 0.854,1.792 1.24,2.167 0.385,0.375 10 false 2M 0.896,2.229 1.281,2.604 0.385,0.375 10 false 2K 0.917,2.448 1.302,2.823 0.385,0.375 10 false 2L 3.781,0.969 4.167,1.344 0.385,0.375 10 false A 5.844,1.094 6.229,1.469 0.385,0.375 10 false 2N 5.844,1.76 6.229,2.135 0.385,0.375 10 false 2O 3.469,7.875 3.854,8.25 0.385,0.375 10 false A 6.427,4.479 6.813,4.854 0.385,0.375 10 false 2L 5.406,4.49 5.792,4.865 0.385,0.375 10 false 2K 3.854,4.49 4.24,4.865 0.385,0.375 10 false 2M 1.427,4.375 1.813,4.75 0.385,0.375 10 false 2Q 1.438,4.698 1.823,5.073 0.385,0.375 10 false 2P 1.854,4.698 2.24,5.073 0.385,0.375 10 false *C 1.854,4.396 2.24,4.771 0.385,0.375 10 false *B 1.615,6.208 2,6.583 0.385,0.375 10 false 2N 4.74,6.198 5.125,6.573 0.385,0.375 10 false 2O 2.01,1.698 2.552,2 0.542,0.302 10 false G216 1.344,3.156 1.885,3.458 0.542,0.302 10 false G216 2.021,1.031 2.563,1.333 0.542,0.302 10 false G217 5.667,3.115 6.208,3.417 0.542,0.302 10 false G217 3.583,3.104 4.125,3.406 0.542,0.302 10 false G218 2.01,1.354 2.552,1.656 0.542,0.302 10 false G218
*A Main Body ECU (Multiplex Network Body ECU) with 3 connectors *B for LHD
*C for RHD - -
*1 Main Body ECU (Multiplex Network Body ECU) - -


a.

b.

Measure the voltage and resistance according to the value(s) in the table below.

If the result is not as specified, there may be a malfunction on the wire harness side.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A-32 (IG) - Body ground None - Body ground Ignition power supply Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
A-31 (BECU) - Body ground None - Body ground Battery power supply Always 11 to 14 V
A-30 (ACC) - Body ground None - Body ground ACC power supply Ignition switch ACC 11 to 14 V
Ignition switch off Below 1 V
A-11 (GND1) - Body ground None - Body ground Ground Always Below 1 Ω



d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G217-13 (M1) - Body ground SB - Body ground Memory switch M1 signal Memory switch M1 off Pulse generation
Memory switch M1 on Below 1 V
G217-16 (MM) - Body ground LG - Body ground Memory switch SET signal Memory switch SET off Pulse generation
Memory switch SET on Below 1 V
G217-14 (M2) - Body ground V - Body ground Memory switch M2 signal Memory switch M2 off Pulse generation
Memory switch M2 on Below 1 V
G218-6 (FLCY) - Body ground*1 R - Body ground Front door courtesy light switch LH signal Front door LH closed Pulse generation
Front door LH open Below 1 V
G218-27 (FRCY) - Body ground*2 B - Body ground Front door courtesy light switch RH signal Front door RH closed Pulse generation
Front door RH open Below 1 V

*1: for LHD

*2: for RHD