1.DRAIN INVERTER COOLANT (w/ Urea SCR System)
12601B
2.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/o Urea SCR System)
17940D
3.REMOVE INTERCOOLER ASSEMBLY (w/ Urea SCR System)
25804
4.REMOVE VACUUM CONTROL VALVE SET
Remove the bolt and disconnect the engine wire bracket.
Disconnect the connector from the vacuum control valve set.
Disconnect the 2 vacuum hoses from the No. 2 vacuum transmitting pipe sub-assembly and No. 2 EGR valve assembly.
Remove the 2 bolts and vacuum control valve set from the intake manifold.
Disconnect the vacuum hose from the vacuum control valve set.
25860
5.REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY
Disconnect the vacuum hose from the No. 1 vacuum switching valve assembly.
Remove the screw and No. 1 vacuum switching valve assembly from the bracket.