Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR (for Intercooler) › from 2018.06
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0363224 ENGINE COOLANT TEMPERATURE SENSOR(for Intercooler) A

1GD-FTV ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR(for Intercooler)  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 89422C 3.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A424418

Disconnect the engine coolant temperature sensor connector.


b.
A424419N01
1.844,1.104 2.344,1.573 2.344,1.573 2.479,1.573 true 2.563,1.521 2.854,1.677 0.292,0.156 10 true SST

Using SST, remove the engine coolant temperature sensor and gasket from the intercooler assembly.

SST
09817-33191  

NOTICE:

Using a wrench, etc., secure the intercooler side and loosen it so that it does not deform.