Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR (for Intercooler) › from 2018.06
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0363224 ENGINE COOLANT TEMPERATURE SENSOR(for Intercooler) A

1GD-FTV ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR(for Intercooler)  INSTALLATION  


PROCEDURE

Hide 89422C 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

a.

Install a new gasket to the engine coolant temperature sensor.


b.

Using SST, install the engine coolant temperature sensor to the intercooler assembly.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)

SST
09817-33191  

NOTICE:

Using a wrench, etc., secure the intercooler side and tighten it so that it does not deform.



c.

Connect the engine coolant temperature sensor connector.


Hide 12601B 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY