86300
1.INSTALL HOLDER ANTENNA ASSEMBLY (for 5 Door)
for Diversity:
Install the holder antenna with the bolt as shown in the part of the illustration labeled A.
Attach the clamp and install the holder antenna with the bolt as shown in the part of the illustration labeled B.
Connect the 3 connectors.
for Non Diversity:
Install the holder antenna with the bolt.
Connect the 2 connectors.
86300
2.INSTALL HOLDER ANTENNA ASSEMBLY (for 3 Door)
for Diversity:
Attach the clamp and install the holder antenna with the 2 bolts as shown in the part of the illustration labeled A.
Attach the 4 clamps and install the holder antenna with the bolt as shown in the part of the illustration labeled B.
Connect the 3 connectors.
for Non Diversity:
Attach the clamp and install the holder antenna with the 2 bolts.
Connect the 2 connectors.
63310
3.INSTALL ROOF HEADLINING ASSEMBLY
for 5 Door:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for 5 Door)>INSTALLATION
for 3 Door:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for 3 Door)>INSTALLATION
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART