Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER FAN › from 2020.08
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261184 CONDENSER FAN A

HEATING / AIR CONDITIONING  CONDENSER FAN  REMOVAL  


PROCEDURE

Hide 53111 1.REMOVE RADIATOR GRILLE

Hide 2.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 53525 3.REMOVE HOOD LOCK RELEASE LEVER PROTECTOR

Hide 88710 5.REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

E447307

a.

Disconnect the connector.


b.

Detach the clamp, remove the 2 bolts and the air conditioning tube and accessory assembly.

HINT:

It is not necessary to completely remove the air conditioning tube and accessory assembly. Move the tube so that the shroud blower assembly can be removed.



c.

Remove the O-ring from the air conditioning tube and accessory assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 15710 6.DISCONNECT OIL COOLER ASSEMBLY (w/ Air Cooled Transmission Oil Cooler)

Hide 53209B 7.REMOVE HOOD LOCK SUPPORT BRACE SUB-ASSEMBLY

a.
E447308

Detach the each clamp.


b.

Remove the 4 bolts and hood lock support brace sub-assembly.


Hide 88590 8.REMOVE SHROUD BLOWER ASSEMBLY

a.

Disconnect the connector.


b.
E447309

Remove the bolt and shroud blower assembly as shown in the illustration.