Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL BATTERY (for RHD) › from 2020.08
RM27T0E _58 Vehicle Interior _053730 DOOR LOCK _0326328 DOOR CONTROL BATTERY(for RHD) A

DOOR LOCK  DOOR CONTROL BATTERY(for RHD)  INSTALLATION  


PROCEDURE

Hide 8598A 1.INSTALL DOOR CONTROL BATTERY (w/o Stop and Start System)

a.

Connect the connector.


b.

Install the door control battery with the 2 nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 8598A 2.INSTALL DOOR CONTROL BATTERY (w/ Stop and Start System)

a.

Install the door control battery with the 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 89261A 3.INSTALL ENGINE STOP AND START ECU (w/ Stop and Start System)

Hide 5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 6. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART


Hide 7. CHECK SRS WARNING LIGHT