Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ECD SYSTEM (w/ DPF) › from 2020.08
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0442647 ECD SYSTEM(w/ DPF) C

1GD-FTV ENGINE CONTROL  ECD SYSTEM(w/ DPF)  P00BB00  Fuel Injector Insufficient Flow - Forced Limited Power  


DESCRIPTION

In order to detect blockages in the pressurized fuel filter, the ECM determines if the fuel pressure of the common rail has deviated from the target value every 5000 km. If the average value of the judgment values recorded every 5000 km exceeds the threshold, a blockage is determined to be occurring in the pressurized fuel filter and a DTC is stored.

Also, at the same time, a message is displayed on the multi-information display and engine output is limited. The message on the multi-information display disappears after clearing the DTC.

A443876C01
1.229,2.052 1.542,2.25 0.313,0.198 10 false *1 4.896,2.063 5.208,2.26 0.313,0.198 10 false *2 3.823,4.063 4.135,4.26 0.313,0.198 10 false *3 1.99,0.24 2.271,0.438 0.281,0.198 10 false *6 4.688,4.104 5,4.302 0.313,0.198 10 false *4 1.604,2.729 1.917,2.927 0.313,0.198 10 false *5 2.833,1.104 3.115,1.302 0.281,0.198 10 false *7
*1 Fuel Supply Pump Assembly *2 Pressurized Fuel Filter
*3 Fuel Filter Element Assembly *4 Fuel Tank
*5 to Exhaust Fuel Addition Injector Assembly *6 to Common Rail Assembly
*7 from Injector Assembly - -
V100143

High Pressure Fuel
V100144

Feed Fuel
V100146

Suction Fuel
V100145

Return Fuel


DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P00BB00 Fuel Injector Insufficient Flow - Forced Limited Power The average judgment value of the fuel pressure deviation state every 5000 km exceeds the threshold.
(1 trip detection logic)
·

Fuel filter cap with element

·

Fuel filter element assembly


Does not come on*
*: The multi information display illuminates.
DTC stored SAE Code: P00BB

Related Data List
DTC No. Data List
P00BB00
·

Fuel Pressure (High)

·

Target Fuel Pressure (High)



CONFIRMATION DRIVING PATTERN

DTC No. DTC Detection Drive Pattern
P00BB00 Idling for 1 second or more

CAUTION / NOTICE / HINT

HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.CHECK DTC OUTPUT
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG) and turn the GTS on.


c.

Enter the following menus: Powertrain / Engine / Trouble Codes.


d.

Read the DTCs.

Result:

DTC P00BB00 is output.



HINT:

When DTC P00BB00 is output, the fuel filter cap with element needs to be replaced. In order to inspect the fuel filter element assembly for blockages, do not perform replacement at this stage.


Result:
Proceed to
NEXT



NEXT

2.INSPECT FUEL FILTER ELEMENT ASSEMBLY
2.INSPECT FUEL FILTER ELEMENT ASSEMBLY
a.

Disconnect the clogging switch connector from the fuel filter element assembly.


b.

Start the engine and warm it up.


c.

Connect a circuit tester to the clogging switch.


d.

Check that the clogging switch does not turn OFF (10 kΩ or higher) when revving the engine up from idling.

HINT:

If the clogging switch turns OFF, it can be determined that the fuel filter element assembly is becoming clogged.


OK:

The clogging switch does not change from ON (below 1 Ω) when revving the engine up from idling.



Result:
Proceed to
OK
NG



OK

3.REPLACE FUEL FILTER CAP WITH ELEMENT

NG

6.REPLACE FUEL FILTER ASSEMBLY
3.REPLACE FUEL FILTER CAP WITH ELEMENT

Result:
Proceed to
NEXT



NEXT

4.BLEED AIR FROM FUEL SYSTEM
4.BLEED AIR FROM FUEL SYSTEM
a.

Bleed the air from the fuel system.

Click hereEngine / Hybrid System>1GD-FTV (FUEL)>FUEL SYSTEM>ON-VEHICLE INSPECTION


Result:
Proceed to
NEXT



NEXT

5.CLEAR DTC
5.CLEAR DTC
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG) and turn the GTS on.


c.

Clear the DTCs.

HINT:

Clearing the DTCs turns off the message in the multi-information display.



Result:
Proceed to
NEXT



NEXT

END

6.REPLACE FUEL FILTER ASSEMBLY
a.

Replace the fuel filter element assembly.

Click hereEngine / Hybrid System>1GD-FTV (FUEL)>FUEL FILTER>REPLACEMENT


Result:
Proceed to
NEXT



NEXT

3.REPLACE FUEL FILTER CAP WITH ELEMENT