23270
1.INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY
Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure pulsation damper.
| *1 | New O-Ring |
Install the fuel pressure pulsation damper to the fuel delivery pipe.
Install the fuel pressure regulator holder.
17129
2.INSTALL INTAKE AIR SURGE TANK
Install the intake air surge tank (See page Engine / Hybrid System>1GR-FE (INTAKE / EXHAUST)>INTAKE MANIFOLD>INSTALLATION).
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
5.INSPECT FOR FUEL LEAK