Home › Engine / Hybrid System › 2TR-FE (FUEL) › FUEL PRESSURE REGULATOR › from 2020.08
RM27T0E _51 Engine / Hybrid System _053666 2TR-FE FUEL _0260531 FUEL PRESSURE REGULATOR A

2TR-FE FUEL  FUEL PRESSURE REGULATOR  INSTALLATION  


PROCEDURE

Hide 23280 1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

a.

Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure regulator assembly.


b.

Install the fuel pressure regulator assembly with the 3 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


c.

Connect the wire harness clamp bracket with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


d.

Attach the wire harness clamp.


e.

Connect the purge VSV connector.


Hide 22030 3.INSTALL THROTTLE BODY WITH MOTOR ASSEMBLY

Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 5. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART