77213B
1.INSTALL FUEL TANK TO FILLER PIPE HOSE
Align the fuel tank sub-assembly side mark with the hose side mark.
| *a | Fuel Tank Sub-assembly Side Mark |
| *b | Hose Side Mark |
Install the fuel tank to filler pipe hose to the fuel tank sub-assembly.
77643A
2.INSTALL NO. 3 FUEL TANK PROTECTOR
Install the No. 3 fuel tank protector and attach the 4 clamps.
Install the 2 bolts.
77020A
3.INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
77209D
4.INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY AND FUEL RETURN TUBE SUB-ASSEMBLY (for Single Tank Type)
Install the fuel tank main tube sub-assembly and fuel return tube sub-assembly with the 2 fuel tube joint clips.
Check that there are no scratches or foreign objects on the connecting parts.
Check that the fuel tube joints are inserted securely.
Check that the fuel tube joint clips are on the collars of the fuel tube joints.
After installing the fuel tube joint clips, check that the fuel tube joints cannot be pulled off.
| *a | Fuel Tube Joint |
| *b | O-Ring |
| *c | Fuel Tube |
| *d | Fuel Tube Joint Clip |
| *e | CORRECT |
| *f | INCORRECT |
Install the fuel tank main tube sub-assembly and fuel return tube sub-assembly to the fuel tank sub-assembly.
77209D
5.INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY, FUEL RETURN TUBE SUB-ASSEMBLY AND NO. 2 FUEL MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)
Install the fuel tank main tube sub-assembly, fuel return tube sub-assembly and No. 2 fuel main tube sub-assembly with the 3 fuel tube joint clips.
Check that there are no scratches or foreign objects on the connecting parts.
Check that the fuel tube joints are inserted securely.
Check that the fuel tube joint clips are on the collars of the fuel tube joints.
After installing the fuel tube joint clips, check that the fuel tube joints cannot be pulled off.
| *a | Fuel Tube Joint |
| *b | O-Ring |
| *c | Fuel Tube |
| *d | Fuel Tube Joint Clip |
| *e | CORRECT |
| *f | INCORRECT |
Install the fuel tank main tube sub-assembly and fuel return tube sub-assembly to the fuel tank sub-assembly.
Install the No. 2 fuel main tube sub-assembly to the fuel tank sub-assembly and attach the clamp.
77651A
6.INSTALL FUEL TANK CUSHION
Install 3 new fuel tank cushions to the fuel tank sub-assembly.
77100U
7.INSTALL FUEL TANK SUB-ASSEMBLY
Set the fuel tank sub-assembly on an engine lifter and lift up the engine lifter.
Do not allow the fuel tank sub-assembly to contact the vehicle, especially the differential.
Install the 2 fuel tank band sub-assemblies with the 2 pins and 2 clips.
Connect the 2 fuel tank band sub-assemblies with the 2 bolts.
77213B
8.CONNECT FUEL TANK TO FILLER PIPE HOSE
Connect the fuel tank to filler pipe hose to the filler pipe.
9.CONNECT FUEL CUT OFF TUBE (for Single Tank Type)
Connect the fuel cut off tube (See page Engine / Hybrid System>2TR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).
10.CONNECT FUEL CUT OFF TUBE (for Double Tank Type)
Connect the fuel cut off tube (See page Engine / Hybrid System>2TR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).
77012
11.CONNECT FUEL TANK BREATHER TUBE SUB-ASSEMBLY (for Single Tank Type)
Connect the fuel tank breather tube sub-assembly (See page Engine / Hybrid System>2TR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).
77012
12.CONNECT FUEL TANK BREATHER TUBE SUB-ASSEMBLY (for Double Tank Type)
Connect the fuel tank breather tube sub-assembly (See page Engine / Hybrid System>2TR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).
77206C
13.CONNECT NO. 2 FUEL MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)
Connect the No. 2 fuel main tube sub-assembly (See page Engine / Hybrid System>2TR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).
77207A
14.CONNECT FUEL RETURN TUBE SUB-ASSEMBLY
Connect the fuel return tube sub-assembly (See page Engine / Hybrid System>2TR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).
77209D
15.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY
Connect the fuel tank main tube sub-assembly (See page Engine / Hybrid System>2TR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).
77606
16.INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY
Install the No. 1 fuel tank protector sub-assembly with the 6 bolts.
58325E
17.INSTALL REAR FLOOR SERVICE HOLE COVER
Connect the fuel pump and fuel sender gauge connector.
Install the rear floor service hole cover with the 3 screws.
67918D
18.INSTALL REAR DOOR SCUFF PLATE LH
67934
19.INSTALL QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)
58371F
20.INSTALL REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)
21.INSTALL REAR SEAT ASSEMBLY LH
for 60/40 Split Double-folding Seat Type LH Side: (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type LH Side)>INSTALLATION)
for 60/40 Split Slide Walk-in Seat Type LH Side: (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type LH Side)>INSTALLATION)
22.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
23. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
24.INSPECT FOR FUEL LEAK